Search the MPC:

		You are here: Home '64-'72 Ford Truck MPC SECTION 35 Page 14	[667]
		Other pages in this section: - 01 - 02 - 03 - 04 - 05 - 06 - 07 - 08 - 09 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34

SECTION 35

3524 — SHAFT and WORM ASSY. - STEERING GEAR

Shafts shown below & in Section 35.1 are part of the steering gear (3504). Some F100/350 units use two (3524) shafts. Refer to Group 3A526 for the upper shaft on these units & refer below for lower shaft (part of the steering gear).

How to find the correct shaft and worm assembly

If length and worm stamping are known and appear below, use the Identification Chart to locate the service part number.
To locate the correct number using the truck model and year, refer to Group 3504 in Section 35.1. Find the correct (3504) for the truck model. The Parts List number is shown with the steering gear. Turn to the Parts List (and Shaft and Worm Assembly) needed.

EXAMPLE:
Group 3504 shows C5TZ 3504-C for a 1966 B600 Model with manual steering. Components of C5TZ 3504-C are shown in Parts List 25. Parts List 25 shows C5TZ 3524-E as the Shaft and Worm Assembly for this gear.

SHAFT and WORM ASSY. IDENTIFICATION CHART

LENGTH (INCHES)	WORM STAMPED	PART NO.
5 11/64		C7TZ 3524-F
5 25/64		C7TZ 3524-E
6	308	C7TZ 3524-C
6 9/32	300	C4TZ 3524-C
6 9/32	303	C6TZ 3524-F
6 13/32	7	B7T 3524-A
6 13/32	85	B7QH 3524-B
6 7/16	611	C4TZ 3524-F
6 1/2	611	C6TZ 3524-E
6 9/16		C7TZ 3524-D
6 19/32	611	C4TZ 3524-D
6 37/64	611	C1TT 3524-K
6 57/64	513	C3TZ 3524-K
7 1/64	85	C3TZ 3524-L
7 1/64	300	C4TZ 3524-B
7 1/32	611	C4TZ 3524-E
7 3/16		C5TZ 3524-B
7 3/16		C8UZ 3524-A
7 13/64	611	C8TZ 3524-A

LENGTH (INCHES)	WORM STAMPED	PART NO.
7 1/4		C5TZ 3524-G
7 15/16	711	C3TZ 3524-M
7 15/16	728	C4TZ 3524-G
8 7/32	36	C4TZ 3524-H
8 7/32	715	C1TT 3524-M
8 15/16	513	C3TZ 3524-J
9 1/16	300	C4TZ 3524-A
9 1/4	611	C5TZ 3524-D
10 1/16	611	D0HZ 3524-B
11 15/16		D0HZ 3524-E
12 1/2	729	C6TZ 3524-N
12 1/2	G07	D0HZ 3524-C
12 1/2	G06	D0HZ 3524-F
13 3/8		C6TZ 3524-P
30 29/64		C7TZ 3524-A
31 1/4		C8UZ 3524-B
32 9/16		C1UZ 3524-B
32 27/32		C9TZ 3524-C
34 29/32		C9TZ 3524-B

LENGTH (INCHES)	WORM STAMPED	PART NO.
35 5/8		C5TZ 3524-H
35 5/8		C9TZ 3524-A
36 5/16		C7TZ 3524-B
39 7/8	88	B7C 3524-A
39 57/64	513	C1TT 3524-G
39 29/32	45	B7Y 3524-A
40 1/4	07	B9T 3524-A
40 7/16	513	C3TZ 3524-R
40 1/2	405	C1TT 3524-C
40 31/32	85	B7QH 3524-A
41 1/8	7	B7Q 3524-A
41 1/4		B9TT 3524-B
41 11/32		C1TZ 3524-A
41 1/2	513	C3TZ 3524-G
41 7/8	300	C4TZ 3524-J
42 11/16	45	B7T 3524-B

43 21/32	513	C1TT 3524-F
43 31/32	85	C1TT 3524-J

LENGTH (INCHES)	WORM STAMPED	PART NO.
44 1/4	7	B7Q 3524-B
44 39/64	513	C1TT 3524-H
44 5/8	513	C3TZ 3524-C
44 5/8	611	C7TZ 3524-H
44 7/8	300	C4TZ 3524-K
44 15/16	85	C3TZ 3524-B
44 31/32	711	C1TT 3524-L
45	611	C4TZ 3524-M
45 7/16	405	C1TT 3524-D
45 7/16	513	C3TZ 3524-N
45 15/32	728	C7TZ 3524-G
46	711	C3TZ 3524-A
46	728	C4TZ 3524-N
46 7/16	513	C3TZ 3524-F
46 3/4	300	C4TZ 3524-L
48 3/16	300	C5TZ 3524-E
50 5/8	53	C0TT 3524-A
56 3/8	53	B7J 3524-A
		D0HZ 3524-A

3524 —SHAFT ASSY. - STEERING COLUMN - Refer to Group 3A526

YEAR	MODEL	DESCRIPTION	QTY.	PART NUMBER
3C524 — PLATE - POWER STEERING HYDRAULIC CONTROL
FOR CYLINDER ASSY. - Refer to P/S Cylinder Parts Lists Section 35.2 FOR DRAG LINK ASSY. - Refer to parts listed below
Recirculating ball type
64/69 64/66 64/66 66/	B-F-N750/1100, NT-T700/950 H-HT950/1000 B-F-N500 /700 C500/800 (C850 - exc. 175" W/B)	Control valve stop - 1" I.D. - 2 5/8" O.D. - 1/8" thick Part of C4TZ 3304-M Part of C3TZ 3A540-B, C3TZ 3304-G Part of C6TZ 3304-D	1 1 1 1	C1TT 3C524-A
64/66	B-F-N500/750	Linkage bushing - 5M, 5.5M, 6M, 7M front axles - 11/16" I.D. - 1 55/64" O.D. - 7/64" thick - part of C4TZ 3304-G,H,J,K,L,AE	1	C4TZ 3C 524-A

Recirculating ball type

Symbol (in the text listings or exploded-view diagram) indicates part is not supplied for service due to the following:
          a. Part is superseded and replaced as indicated in the description column of text
          b. Part can be improvised as indicated in the description column of text
          c. Due to it's function there would be little or no demand

- Identifies unique Canadian part numbers and application and have been and footnoted.

- Identifies unique U.S. part numbers and application and have been footnoted.

- Site Admin notes (not part of the original MPC)