Search the MPC:

		You are here: Home '64-'72 Ford Truck MPC SECTION 35 Page 12	[665]
		Other pages in this section: - 01 - 02 - 03 - 04 - 05 - 06 - 07 - 08 - 09 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34

SECTION 35

YEAR	MODEL	DESCRIPTION	QTY.	PART NUMBER
3517 — BEARING ASSY. - STEERING COLUMN - continued

P SERIES
64/67 68/	P100/500 P350/500	Part of B7J 3509-B, C1TT 3509-V,Y,AF, C5TZ 3514-F Part of B7J 3509-B, C1TT 3509-V,Y, C5TZ 3514-F	1 1	C3DZ 3517-A

W-WT SERIES
66/68	W-WT1000 "Before Ser. C70,001"	Upper	1	C3TZ 3517-B
68/	W-WT900/1000 "From Ser. C70,001"	Upper	1	C3DZ 3517-A
66/69	W-WT 1000 "Before Ser. F30,001"	Lower	1	C3TZ 3517-B
69/	W-WT900/1000 "From Ser. F30,001"	Lower	1	C8HZ 3517-A
64/	B-F-T700/1100, C550/1100	Ball (bearing) - 5/32"	28	353077-S (AA2)
69/	E100/300	Snap ring (bearing)	1	97663-S (04A)

YEAR	MODEL	DESCRIPTION	QTY.	PART NUMBER
3C517 — WASHER - POWER STEERING CONTROL VALVE CENTERING SPRING
FOR CYLINDER ASSY. - Refer to P/S Cylinder Parts Lists Section 35.2 FOR DRAG LINK - Refer to parts listed below
64/ 64/66 64/69	C500/1100, CT750/950, F800/1100, T750/950 H-HT950/1000 T700, N750/1100, NT850/950	Steel - 1/2" I.D. - .22" thick - also part of C6TZ 3304-D, C7TZ 3304-G Part of C4TZ 3304-M Part of C7TZ 3304-H	2 2 2	C1TT 3C517-A
64/66	B-F-N500/750	5M, 5.5M, 6M, 7M front axles - Nylon - Red - .525" I.D. - .3" thick	2	C4TZ 3C517-A

3D517 SHAFT & CONTROL ASSY. - POWER STEERING GEAR INPUT - Refer to Steering Gear Section 35.1

YEAR	MODEL	DESCRIPTION	QTY.	PART NUMBER
3518 SLEEVE - STEERING COLUMN TUBE BEARING
64/66 64/65 66/67	F800/1100 T800/950 F800/1000, T800/950 " Before Ser. B26,001"	Upper - 1.38" O.D. - use with C3TZ 3509-G Use w/ C6TZ 3509-B, C	1 1 1	7EQ 3518
64/67 68/ 66/67 68/	B-F100/600 F100/250 (4x2), F350 F800/1000, T700/800 " Before Ser. B26,001" F100/250 (4x4)	Upper or lower - .75" I.D. - .98" O.D. Upper and lower Use w/ C6TZ 3509-A Upper	1 or 2 2 1 1	B1AZ 3518-A
64/66 64/66 67/69	B500/750 (F500/750 - Model 84) F800/950, T700/750 F800/1000, T800/950 "From Ser. B26,001"	Upper - 1.12" O.D. .878" I.D. Use w/ C7TZ 3509-F, L, M	1 1 1	C4TZ 3518-A

66 67/	F100 (4x4) F100/250 (4x4)	Lower - .92" & 1.04" I.D. - .468" thick Lower	1 1	C6TZ 3518-A

67/69 70/	C500 1000, CT750/950 - "From Ser. B26,001" C500/900, CT800/900	Use w/ C7TZ 3509-J - 7/8" I.D. x 1 1/8" O.D.	1 1	C4TZ 3518-A
64/67	E100		1	B1AZ 3518-A

64/67	N500/1100, NT850/950 "Before Ser. B26,001"	Upper - 1.13" O.D. .90" I.D. - .72" thick	1	C3TZ 3518-A
67/69 67/68 68/69	N500/750 "From Ser. B26,001" N850/1000, NT850/950 - "From Ser. B26,001 to C70,001" N8000		1 1 1	C7TZ 3518-A
68/69	N850/1000, NT850/950 "From Ser. C70,001"	Lower	1	C8HZ 3518-A

64/67 68/	P100/500 P350/500		1 1	B1AZ 3518-A

66/68	W-WT 1000 "Before Ser. C70,001"	Upper	1	C3TZ 3518-A
68/70	W-WT900/1000 "From Ser. C70,001"	Upper	1	C7TZ 3518-A
71/	W-WT900	Upper	1	C4TZ 3518-A
66/68	W-WT 1000 "Before Ser.C70,001"	Lower sleeve is not required - use 3C687 cover only		3518
68/	W-WT900/1000 "From Ser. C70,001"	Lower	1	C8HZ 3518-A

Symbol (in the text listings or exploded-view diagram) indicates part is not supplied for service due to the following:
          a. Part is superseded and replaced as indicated in the description column of text
          b. Part can be improvised as indicated in the description column of text
          c. Due to it's function there would be little or no demand

- Identifies unique Canadian part numbers and application and have been and footnoted.

- Identifies unique U.S. part numbers and application and have been footnoted.

- Site Admin notes (not part of the original MPC)