Search the MPC:

		You are here: Home '64-'72 Ford Truck MPC SECTION 37 Page 29	[828]
		Other pages in this section: - 01 - 02 - 03 - 04 - 05 - 06 - 07 - 08 - 09 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30

SECTION 37

3C764 — SCREW KIT - STEERING GEAR SECTOR SHAFT ADJUSTING - Refer to Steering Gear Section 35.1

3C765 - 3D772 — Refer to Steering Gear Section 35.1

YEAR	MODEL	DESCRIPTION	QTY.	PART NUMBER
3C773 — BUSHING - STEERING COLUMN SHAFT
69/ 70	E100/300	1 3/4” I.D. x 1 3/8” O.D. x 3/8" thick	1	C8UZ 3C773-A
71/	E100/300 (with A/T column shift)	#70, 3/4" I.D. x 1 3/8” O.D. x 3/8" thick	1	D2UZ 3C773-B

3D773 - 3D776 — Refer to Steering Gear Section 35.1

YEAR	MODEL	DESCRIPTION	QTY.	PART NUMBER
3783 — ACTUATOR KIT - P/S CONTROL VALVE
71/	E100/300		1	D1UZ 3783-A

YEAR	MODEL	DESCRIPTION	QTY.	PART NUMBER
3790 — EXTENSION - STEERING COLUMN TUBE FLANGE
64/66 66 67/	F100/250 (4x2) F100 (4x4) F100/350 - 4 speed S/T	Also Refer to Group 7228	1 1 1	C3DZ 3790-A

3794 — PIN - POWER STEERING CYLINDER MOUNTING Supplied in 3C53S kits

YEAR	MODEL	DESCRIPTION	QTY.	PART NUMBER
3797-8 — END - POWER STEERING CYLINDER - Also Refer P/S Cylinder Parts Lists Section 35.2
64	F100/250 (8 cyl. 292) - 4x2	External thread - part of C1TZ 3A730-A also use (1) with C1TZ 3A540-A - includes dust shield & fitting	3	C1TZ 3797-A
64	F100/250 (8 cyl. 292) - 4x2	Internal thread - use w/ C1TZ 3A540-A - includes dust shield & fitting	1	C1TZ 3738-A

3805 — SEAL - POWER STEERING GEAR PISTON - Refer to Steering Gear Section 35.1

YEAR	MODEL	DESCRIPTION	QTY.	PART NUMBER
3814 — YOKE - STEERING COLUMN COUPLING SHAFT SLIP

C-CT SERIES
64/65 66/72	C-CT550/1100 C-CT500/900 "Before Ser. P40,001"	Clamp yoke Clamp yoke	1 1	C4TZ 3814-A
72	C-CT500/900 "From Ser. P40,001"	Clamp yoke	1	D2HZ 3814-A
66/69 66/69 66/69 70/	C 550/750 C800, (C850 exc. 175"W/B) - M/S C800(C850 exc. 175" W/B) - P/S C500/750, C800/900 (9 1/2" frame) - M/S & P/S	Double center yoke All F/A exc. 12M (conv.)	1 1 1	C5TZ 3814-B

F SERIES
66	F100 (4x4) "Before Ser. 858,001"	16 serrations - part of C6TZ 3B676-C	1	C6TZ 3814-A
66	"From Ser. 858,001”	26 serrations - part of C6TZ 3B676-C	1	C6TZ 3814-C
67/72	F100/250 (4x4) "Before Ser. N00,001"	Part of C7TZ 3B676-B, C, C9TZ 3B676-A, B	1	C6TZ 3814-C
72	F100/250 (4x4) "From Ser. N00,001"		1	D2TZ 3814-A

H-HT SERIES
64/66	HT950, H1000	Single yoke - use w/ C4TZ 3A526-B & C6TZ 3815-B	1	C4TZ 3814-A

L-LN-LNT-LT-LTS SERIES
70/	L-LN-LNT-LT-LTS 800/900	7/8" - shaft dia. - upper & lower	2	D0HZ 3814-A
	LN500/750 - manual steering	7/8" - shaft dia. - upper & lower	2	D0HZ 3814-A
	- P/S	7/8" - shaft dia. - upper	1	D0HZ 3814-A
	- P/S	3/4" - shaft dia. - lower	1	D0HZ 3814-B
70/	L-LN-LNT-LT-LTS500/900	Bolt - 3/8"-24 x 1 3/4" (yoke to shaft)	2	383730-S2 (BB-302C)
		Nut 3/8" - 24	2	384487-S2 (MM65E)

Symbol (in the text listings or exploded-view diagram) indicates part is not supplied for service due to the following:
          a. Part is superseded and replaced as indicated in the description column of text
          b. Part can be improvised as indicated in the description column of text
          c. Due to it's function there would be little or no demand

- Identifies unique Canadian part numbers and application and have been and footnoted.

- Identifies unique U.S. part numbers and application and have been footnoted.

- Site Admin notes (not part of the original MPC)