Search the MPC:

		You are here: Home '64-'72 Ford Truck MPC SECTION 36.1 Page 24	[772]
		Other pages in this section: - 01 - 02 - 03 - 04 - 05 - 06 - 07 - 08 - 09 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46

SECTION 36.1 - POWER STEERING PUMP ASSEMBLIES

PARTS LISTS

QTY.	PART NUMBER	DESCRIPTION
PARTS LIST NO. 27 - C6TS 3A691-C - (VICKERS)
1	C8TZ 3A674-C	Pump assy. - Vickers - see details below
	3A697	Reservoir assy. - see service details
1	C7TZ 3A732-G	Bracket - adjusting
1	C7TZ 3A733-G	Pulley - 4 3/4" O.D. - 1 1/2" thick - single sheave
2	30466-S2	Screw
1	33943-S8 (M36)	Nut - 1/2"-20
2	34807-S8 (X66)	Lockwasher - 3/8" - 11/16" O.D.
1	34809-S8 (X68)	Lockwasher - 1/2" - 7/8" O.D.
1	44719-S8 (X17)	Washer - reservoir flat - 1/4"
1	44735-S8 (X32)	Washer flat - 1/2" - 1 1/4" O.D.

Details of (3A674) Assy.
1	C6TZ 3D525-B	Bearing - shaft - ball type - 21/32" I.D. x 1 9/16" O.D. x 3/8" thick
1	C6TZ 3B559-A	Shaft - rotor
1	C8TZ 3A561-B	Valve - relief
1	C6TZ 3A570-A	Spring - flow control
1	C6TZ 3B584-A	Seal & gasket kit - includes (3) "O" rings, (1) shaft seal (1) adapter gasket
1	B7MY 3B591-A	Plug - valve
1	C6TZ 3B595-A	Key - rotor shaft
1	C6TZ 3E598-A	Adapter - pump outlet
1	B7AZ 3B608-A	Spring - relief valve
1	C6TZ 3E632-A	Ring - bearing snap
1	C6TZ 3A643-A	Housing
1	C6TZ 3A645-A	Plate - pressure
1	C6TZ 3A698-A	Cover - housing
2	C6TZ 3D710-A	Pin - rotor drive - 3/16" dia. x 1 3/8" long
1	C6TZ 3A711-A	Impeller repair kit - includes (10) vanes, (1) rotor & (1) ring
1	72272-S8	Pin
1	97624-S7	Ring - retaining
4	300892-S2	Screw - 3/8"-16 x 3"

Details of (3A697) Assy.
1	C6TZ 3B563-A	Reinforcement - reservoir orifice
1	C6TZ 3A582-A	Cover - reservoir tank - includes gasket
1	C6TZ 3E597-A	Baffle - reservoir retaining line
1	C6TZ 3E600-A	Clip - reservoir orifice reinforcing
2	C6TZ 3601-A	Bolt - res. oil filter element support
1		Element - reservoir filter
1	C6TZ 3E630-A	Nut - reservoir lock
1	C6TZ 3E631-A	Stud - reservoir
1	C6TZ 3A699-A	Reservoir - includes fitting
1	33895-S8	Nut - wing - reservoir
1	34805-S8 (X62)	Lockwasher - reservoir - 1/4" - 1/2" O.D.

PARTS LIST NO. 28 - C7TA 3A691-H, K - (EATON)
1	D2TZ 3A674-A	Pump assy. - Eaton - see details below
1	C3TZ 3A695-A	Adapter kit - reservoir to pump Consists of (1) Union (w/eye 8 3/4"-16 thread) (1) Screw (5/8"-18 x 1 1/4" hollow shank) (1) Flat washer (copper - 5/8" I.D.) (1) Flat washer (copper - 3/4" I.D.)
	3A697	Reservoir assy. - see service details
1	C4TZ 3A732-A	Bracket - adjusting (use w/C7TA 3A691-K)
1	C4TZ 3A732-B	Bracket - adjusting (use w/C7TA 3A691-H)
1	C7TZ 3A733-D	Pulley - 4 11/16" O.D. - 1 7/32" thick - single sheave
1	20366-S8 (B52)	Bolt - 5/16"-18 x 7/8"
3	34807-S8 (X66)	Washer - lock - 3/8"
2	42789-S8 (U10)	Screw & lockwasher - hex. head - 5/16"-18 x 3/4"

QTY.	PART NUMBER	DESCRIPTION
PARTS LIST NO. 28 - C7TA 3A691-H, K - (EATON) - cont'd.
1	44725-S8 (X22)	Washer - reservoir cover flat - 5/16" - 1 1/8" O.D.
3	45534-S8 (B95)	Bolt - hex. head - 3/8"-16 x 3"
1	58637-S2 (B86A)	Bolt - 3/8"-16 x 1 3/4" (pump to engine)
2	58638-S	Bolt - 3/8"-16 x 2"
1	74172-S (L3)	Key - pulley drive - 1/2" dia. x 1/8" thick
3	351385-S7 (XX-158)	Washer - flat - 3/8"
1	353374-S	Bolt - 3/8"-16 x 2 3/8" (3A732 bracket to engine for C7TA 3A691-H with 330 M/D engine)
1	353846-S8 (XX120)	Washer - flat (pulley to pump) - 5/16"
1	383853-S	Bolt - 3/8"-16 x 6 1/4" (3A732 bracket to 3C511 support for C7TA 3A691-K)

Details of (3A674) Assy.
1	C7TZ 3B559-A	Shaft - rotor - 4 3/16" long
1	C7TZ 3A561-A	Valve assy. - flow control
1	B8AZ 3A570-A	Spring - valve
1	B8TZ 3B584-C	Seal & gasket kit - pump repair
1	C2SZ 3B592-A	Seal - rotor shaft oil
1	LA 33618-A	"O" ring - valve cap - 51/64" I.D. x 15/16" O.D.
1	B5A 33621-A	Retainer - rotor shaft brg. snap ring
1	B8E 33627-A	Retainer - valve
1	LA 33633-A	Pin - rotor shaft - 3/16" dia.
1	B8TZ 3A643-B	Housing (includes 3760 venturi)
1	C7TZ 3A698-B	Cover assy. - housing - includes (1) 3A700 tube seat & (2) 357648-S dowel pin
1	C1SS 3A700-A	Orifice - tube seat (to pressure line hose) -.150"/.151" I.D.
1	C7TZ 3A711-B	Impeller repair kit - incl. (1) carrier, (1) insert. (6) rollers
1	AF 3760-A	Venturi - flow control
1	A8AZ 10094-B	Bearing - rotor shaft
1	87014-S91 (T1AA)	"O" ring - by pass - 9/16" I.D. x 11/16" O.D.
1	87147-S91 (T38)	"O" ring - housing to cover - 2 5/8" I.D. x 2 53/64" O.D.
2	357648-S (NN55)	Pin - dowel - 5/16" dia. x 3/4" long
1	370903-S (NN53)	Pin - cam dowel - 1/8" dia. x 1/4" long
2	370967-S (BB158)	Bolt - hex. head - 3/8"-16 x 2 1/8"

Details of (3A697) Assy.
1	C1TT 3A006-A	Cap assy. - reservoir cover (round head - with dipstick)
1	AE 33542-A	Connector - reservoir return - (use w/ C7TA 3A691-K)
2	B5A 33547-A	"O" ring - reservoir orifice - 53/64" I.D. x 15/16" O.D. x 7/64" thick
2	B6QW 33549-A	"O" ring - reservoir orifice - 11/32" x 7/16" O.D. x 1/16" thick
1	C1TT 3A582-A	Cover - reservoir (includes 3A642)
1	C5TZ 3C602-A	Element - reservoir filter
1	C2TZ 3A642-A	Gasket - reservoir cover - 4 3/4" I.D. x 5 7/16" O.D.
1	B4AZ 3B688-B	Spring - res. filter element retaining
1	C4TZ 3A697-B	Reservoir - oil
1	B4AZ 3B754-A	Seat - reservoir filter element retaining spring
1	B9A 6570-A	Grommet - reservoir cover bolt - 5/16" I.D. x 1" O.D. x 1/2" thick
1	33896-S8 (M182)	Nut - wing - reservoir cover - 5/16"-18
1	34806-S7 (X64)	Lockwasher - 5/16"
1	359841-S8 (WW22)	Stud - res. cover - 5/16"-18 x 4 5/8"

For components refer to group in Section 35 Also supplied in 3B584 kit

Symbol (in the text listings or exploded-view diagram) indicates part is not supplied for service due to the following:
          a. Part is superseded and replaced as indicated in the description column of text
          b. Part can be improvised as indicated in the description column of text
          c. Due to it's function there would be little or no demand

- Identifies unique Canadian part numbers and application and have been and footnoted.

- Identifies unique U.S. part numbers and application and have been footnoted.

- Site Admin notes (not part of the original MPC)