Search the MPC:

ABOUT / TUTORIALS
'64-'72 FORD TRUCK MPC
GENERAL INFORMATION
CHASSIS PARTS - INDEX
PAINT SECTION
SECTION 10 INDEX
SECTION 20 INDEX
SECTION 30 INDEX
Section 30
Section 30.1
Section 30.2
Section 30.3
Section 30.4
Section 30.5
Section 30.6
Section 30.7
Section 30.8
Section 30.9
Section 30.10
Section 32
Section 35
Section 35.1
Section 35.2
Section 36
Section 36.1
Section 36.2
Section 37
SECTION 40 INDEX
SECTION 50 INDEX
SECTION 60 INDEX
SECTION 70 INDEX
SECTION A70 INDEX
SECTION T70 INDEX
SECTION 80 INDEX
SECTION 90 INDEX
SECTION 100 INDEX
SECTION 110 INDEX
SECTION 120 INDEX
SECTION 130 INDEX
SECTION 140 INDEX
SECTION 160 INDEX
SECTION 170 INDEX
SECTION 180 INDEX
BODY PARTS - INDEX
SOFT TRIM PARTS - INDEX
CROSS REFERENCE LIST

You are here: Home '64-'72 Ford Truck MPC SECTION 30 Page 15 [592] Other pages in this section: - 01 - 02 - 03 - 04 - 05 - 06 - 07 - 08 - 09 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18

SECTION 30

3111 — PIN and BUSHING KIT - FRONT WHEEL SPINDLE - continued - For Model Application refer to Section 30, page 5
D2TZ 3111-D — 4.7M front axle Consists of: 4 - C3TZ 3110-A Bushing 2 - C3TZ 3115-A Bolt 2 - C8TA 3117-A Shim 2 - 19B 3117 Shim 2 - D2TZ 3122-A Pin 2 - A8TZ 3123-A Bearing 4 - C3TZ 3125-A Seal 2 - 34671-S2 Locknut 2 - 34793-S2 L/washer 4 - 87922-S8 Fitting	D2UZ 3111-B — 3.3M front axle Consists of: 4 - C8TZ 3110-A Bushing 2 - C7TA 3115-E Pin 2 - D2TZ 3122-A Pin 2 - C8TZ 3123-D Bearing 4 - C7TZ 3B167-A Plug 2 - C8TZ 3178-B Seal 2 - 34671-S2 Nut 2 - 34793-S2 L/washer 4 - 87907-S8 Fitting 4 - 374714-S8 Plug cap
D2UZ 3111-A — 2.5M & 2.75M front axles Consists of: 2 - C8TZ 3110-C Bushing 2 - D2UZ 3110-A Bushing 4 - C8TZ 3113-A Cap 2 - D2UA 3115-D Pin 2 - A8TZ 3122-A Pin 2 - C8UZ 3123-A Bearing 2 - C8TZ 3178-A Seal 2 - 34671-S8 Nut 2 - 34793-S2 L/washer 4 - 87907-S8 Fitting	D3TZ 3111-A — 6M & 7M front axles Consists of: 4 - C7TZ 3110-A Bushing 1 - D3TA 3115-BA Pin 2 - 19B 3117 Shim 2 - C1TT 3117-B Shim 2 - C3TZ 3122-A Pin 2 - C3TZ 3123-A Bearing 4 - C3TZ 3125-A Seal 2 - 55771-S2 Nut 1 - Instr. sheet

3115 — PIN - FRONT AXLE SPINDLE - For Model Application refer to Section 30, page 5
LENGTH (INCHES)	O.D. (INCHES)	STRAIGHT OR TAPERED	AXLE CAPACITY (LBS.)	SUPPLIED IN KIT	PART NUMBER
1.97	.62	S	3M		C0TT 3115-A
4.91	.74	S	2150	C4UZ 3111-B	C4UA 3115-A
5.92	.86	S	2.3M, 2.6M	C8UZ 3111-A	C8TA 3115-D
6.07	.85	S	2.5 & 2.75M	D2UZ 3111-A	D2UA 3115-AA
6.35	.85	S	2.6M, 3M	C5TZ 3111-C	C5TA 3115-A
6.35	.85	S	2.6M, 2.75M, 3M, 3.15M	C6TZ 3111- A, B C8TZ 3111-A, C9TZ 3111-A, D2TZ3111-A,B	C5TA 3115-B
6.45	1.05	S	3.8M 3.5M, 3.75M	C8TZ 3111-C, C9TZ 3111-B D2TZ 3111-C, D D2UZ 3111-B	C7TA 3115-E
6.54	.85	S	2.6M	B7C 3111-A	TAAK 3115-A
6.54	.86	S	2.6M	B7TZ 3111-E	C6TA 3115-C
7.00	.92	S	3.8M	B7Y 3111-A	TCAK 3115-B
7.00	.93	S	3.8M	B8Y 3111-A	TCAK 3115-C
7.43	1.23	S	7M	B7TZ 3111-F, C2TZ 3111-B	TGBV 3115-A
7.50	1.234	S	6M	B7TZ 3111-A, C2TZ 3111-A	7EQ 3115
7.86	1.23	S	4.7M, 5M, 5.5M	C3TZ 3111-A	C3TA 3115-A
8.50	1.43	S	9M	B7TZ 3111-G, D0HZ 3111-A	TUBV 3115-A
8.81	1.60	S	11M, 12M	C4TZ 3111-A, C4TZ 3111-B, D0HZ 3111-C	C4TA 3115-A
8.91	1.23	S	6M, 7M	C7TZ 3111-A	C7TA 3115-B
8.91	1.24	S	6M, 7M	D3TZ 3111-A	D3TA 3115-BA
9.12	1.79	S	12M	C3TZ 3111-B, C, D0HZ 3111-B	C3TA 3115-B
10.69	1.79 & 1.40	T	15M	C2TZ 3111-E	C1TT 3115-A
11.04	1.998	S	18M	C5TZ 3111-B	C5TZ 3115-A

Refer to Group 3115 for bolt dimensions          Steel & Bronze

C5TA 3115-A has slot in center; C5TA 3115-B has slot 2 1/2" from end