Search the MPC:

	You are here: Home '64-'72 Ford Truck MPC SECTION 21 Page 01	[343]
	Other pages in this section: - 01 - 02 - 03 - 04 - 05 - 06 - 07 - 08 - 09 - 10 - 11 - 12

SECTION 21

YEAR	MODEL 1	DESCRIPTION	QTY.	PART NUMBER
2106 — Refer to Rear Brake Parts List - Section 22.1

2108 — Refer to Front & Rear Brake Parts Lists - Section 20.1 & Section 22.1

@ 2A109 — TUBE - BRAKE AIR RESERVOIR TO ELBOW

@ 2A116 — TUBE - MANIFOLD FITTING TO AIR BRAKE COMPRESSOR GOVERNOR

YEAR	MODEL	DESCRIPTION	QTY.	PART NUMBER
2120 — BRAKE CALIPER REPAIR KIT - FRONT WHEEL - Also Refer to Front Brake Parts List - Section 20.1
68/71	F250 (4x2), F350 "Before Ser. M80,001"	Caliper kit	2	C8TZ 2120-A
	Consists of 2 - C8TA 2B115-A Seal 2 - C8TA 2207-B Boot 2 - C8TA 2B332-B Retainer
72	F250 (4x2), F350 "From Ser. M80,001"	Caliper kit	2	D2TZ 2120-A
	Consists of 2 - D3TA 2B115-AB Seal 2 - D3TA 2207-AA Boot
68/	F250 (4x2), F350	Caliper support kit	2	C8TZ 2120-B
	Consists of 2 - C8TA 2B299-C Insulator 2 - C8TA 2B334-B Bushing 2 - C8TA 2B336-A Boot

2B120-1 — Refer to Front Brake Parts List - Section 20.1

YEAR	MODEL	DESCRIPTION	QTY.	PART NUMBER
@ 2A121 — TUBE - BRAKE AIR HAND CONTROL VALVE EXHAUST - TRACTOR TRAILER EQUIPMENT
64/ 64/	F700/750 (132", 144", 156" W/B) F600 (132", 144", 156" W/B) - 6 cyl. 262	Grommet (tube)	1 1	354002-S (KK7)
64/	CT750/950	Fitting (attach tube to valve) - 1/4"-18 x 1/4"-18 elbow	1	372268-S (II-162E)

2125 — Refer to Front & Rear Brake Parts Lists - Section 20.1, 22.1 & Group 2296

YEAR	MODEL	DESCRIPTION	QTY.	PART NUMBER
@ 2A126 — TUBE - BRAKE AIR RESERVOIR TO TEE - Also Refer to Group 2A146
64/68	N600 - 6 cyl. 262, N600/700 - 8cyl. 292, N750/950 (hydraulic brakes) "Before Ser. C70,001"	16 3/16" long	1	C3TZ 2A126-A
64/68	T750/850 (146", 158"W/B) - hydraulic brakes - "Before Ser. C70,001"	1" O. D. - 51 1/4" developed length	1	C3TZ 2A126-F
64/69	T850 (146" W/B) - hydraulic brakes - "Before Ser. C70,001"	1" O.D. - 54 23/32" developed length	1	C3TZ 2A126-J
68	T850 (146" W/B) - hydraulic brakes - "From Ser. C70,001"	35.95" long - 1" O.D.	1	C8HZ 2A126-B
64 67/	T750/850 (146", 158" W/B) - hydraulic brakes - "Before Ser. 490,001" LT-T750/850 (146" & 158" W/B)	1" O.D. - 51 1/2" developed length	1 1	C3TZ 2A126-E
64/67	T750/850 (146", 158" W/B) - hydraulic brakes - "From Ser. 490,001"	1" O.D. - 51 1/2" developed length	1	C4TZ 2A126-A
64/ 68	T750/850 (158" W/B) - hydraulic brakes - "Before Ser. C70,001"	1" O. D. - 66 23/32" developed length	1	C3TZ 2A126-H
68/	LT-T800/850 (158" W/B) - hydraulic brakes - "From Ser. C70,001"	47 15/16" long - 1" O.D.	1	C8HZ 2A126-A
64/	LT-T800/850 (176" W/B) - 34M rear axle	1" O.D. - 17 3/4" long	1	C3TZ 2A126-K
64/	LT-T750/850 (194", 212" W/B)	1" O.D. - 33" developed length	1	C3TZ 2A126-B
54/	LT-T750/800 (T850 except Diesel) - 194", 212" W/B	1" O.D. - 48 1/8" developed length	1	C3TZ 2A126-D
64/	LN-N600/850, (N950 Gas)	Connector (tube to booster tube) - 1/4" pipe - 3/8" tube	1	370033-S (II-27)
64/	LN-N600/1100, NT850/950	Tee - 5way (tube to reservoir)	1	377613-S (II-146AA)
64	N850/950 (air booster)	Tee - 3 way (to reservoir)	1	374410-S (II-476F)

@ Replacement tubes except as indicated by part number are to be made from bulk tubing stock listed by size and part number under basic group 2269. Insulators are to be improvised from rubber hose, friction tape, etc., as required.

Symbol (in the text listings or exploded-view diagram) indicates part is not supplied for service due to the following:
          a. Part is superseded and replaced as indicated in the description column of text
          b. Part can be improvised as indicated in the description column of text
          c. Due to it's function there would be little or no demand

- Identifies unique Canadian part numbers and application and have been and footnoted.

- Identifies unique U.S. part numbers and application and have been footnoted.

- Site Admin notes (not part of the original MPC)