Door? 67-70 or 71-72?

[Broncobilly66]

I have doors from different trucks. Unknown years. I see on the LMC site that the anti-rattle kits for the windows call out 67-70 and 71-72. What's the difference? And how do I figure out what I have? Thanks

[kf7mjf]

67's are unique with their lever action door locks.

Not sure about the other years so much

[Broncobilly66]

67's are unique with their lever action door locks.

Not sure about the other years so much

Yea I knew about that. Don't know about the windows though. I gutted my doors today, of the glass and vent wings,to weld up the dozen or so mirror holes in them. I didn't see any difference in the two on the truck. I have some othe doors I guess I could look at...

[kf7mjf]

As far as I know, the glass should be the same across the series.

I feel you on the multiple window holes.

[Broncobilly66]

As far as I know, the glass should be the same across the series.
.

Wonder why there's a break in the years on the anti-rattle kit?..

[72BahamaBlue]

As far as I know, the glass should be the same across the series.
.

Wonder why there's a break in the years on the anti-rattle kit?..

The earlier doors had fuzzy type strips both inner and outer. Sometime in '71 the outer strips were changed to rubber for better sealing. They are interchangeable.

[Broncobilly66]

As far as I know, the glass should be the same across the series.
.

Wonder why there's a break in the years on the anti-rattle kit?..

The earlier doors had fuzzy type strips both inner and outer. Sometime in '71 the outer strips were changed to rubber for better sealing. They are interchangeable.

Cool. So I want the 71-72?

[Calfdemon]

As far as I know, the glass should be the same across the series.
.

Wonder why there's a break in the years on the anti-rattle kit?..

The earlier doors had fuzzy type strips both inner and outer. Sometime in '71 the outer strips were changed to rubber for better sealing. They are interchangeable.

The 67-70 strips are felt both inside and out. The 71-72 strips are felt on the inside, and rubber on the outside. The 71-72 are the better design for keeping water out of the inside of your door.

[fireguywtc]

I am pretty sure I read somewhere that the different seal kits are NOT interchangeable.

Read this thread: http://www.fordification.com/forum/view ... ls#p533233

[72BahamaBlue]

I am pretty sure I read somewhere that the different seal kits are NOT interchangeable.

Read this thread: http://www.fordification.com/forum/view ... ls#p533233

Interesting...here's what I've got, passenger door is a 1972.

Inner strip slots, measuring from about the center of the door-lock hole to the center of the slots; approx. 5/8", 5 3/4", 10 7/8", 16".

The outer slots line up with the inners on mine.
My '71's doors are identical.

[flyboy2610]

They will interchange. The old one is out of a '69 door. The new one is from a 71-72 window fuzzie kit from LMC. All the clips line up.
They will interchange.

[fireguywtc]

Well I wish I would have known that earlier today, I just ordered two sets of 67-70 door/window anti-rattle kits for my two trucks. I think I would rather have the rubber ones. Might see if I can adjust my order or might have to send them back and trade them out.

[hazelnut]

Well I wish I would have known that earlier today, I just ordered two sets of 67-70 door/window anti-rattle kits for my two trucks. I think I would rather have the rubber ones. Might see if I can adjust my order or might have to send them back and trade them out.

I remember Ryan wanting to put the rubber ones in his doors and said it was a PITA to put them in 69 doors. I think he had to enlarge the holes if i remember right. I'd send a PM to ask what was the problem before sending the felt one's back.

[fireguywtc]

I found Ryan's orginal post on how he did with his rubber anti-rattle kit. http://www.fordification.com/forum/view ... le#p477311

Flyboy, how has the quality been on those been since you installed them. I know I won't be happy if I can get the rubber seals in my trucks. I just need to find out if I am going to get them from NPD or LMC.

[flyboy2610]

Flyboy, how has the quality been on those been since you installed them. I know I won't be happy if I can get the rubber seals in my trucks. I just need to find out if I am going to get them from NPD or LMC.

I got the seals in the passenger side door quite some time ago, but I haven't gotten around to getting that door on the truck yet. The door has been in the shed covered with a tarp, but the seals seem to be holding up fine.
Wish I could tell you more than that.