Hypoid gear lubricant for limited slip axle
only - (12) 1 qt. plastic container w/spout
D2AZ 19580-A
Hypoid gear lubricant (rear axle) - used with
conventional axles only - 1 gal.
*D2AZ 19580-B
Hypoid gear lubricant (rear axle) - used with
conventional axles only - 5 gal.
D2AZ19580-C
Hypoid gear lubricant (rear axle) - used with
conventional axles only - 120 Ib. keg
D2AZ 19581-A
Speedometer cable lubricant - 1 Ib. can
continued
Premium motor oil grade
Super premium motor oil grade
PART NUMBER
DESCRIPTION
MOTOR
OILS and LUBRICANTS
C1AZ 19582-A
Fluid (Automatic trans. & Power Steering) -
Red - (24) 1 qt. cans
C1AZ19582-C
Fluid (automatic trans. & power steering) -
Red - (6) 1 gal. cans
C1AZ19582-D
Fluid (automatic trans.& power steering) -
Red - 55 gal. drum
D2AZ 19582-A
Fluid (power steering) - Amber
(12) 1 qt. cans
C4AZ 19584-B
Grease (polyethylene) - 16 oz. spray can
D0AZ 19584-A
Grease (polyethylene) - 4 oz. aluminum tube
with plastic cut off spout
B8A 19589-A
Lubricant (special purpose) - 1 Ib.
C1AZ 19590-B
Lubricant (multi-purpose long life) -
(4) 14 1/2 oz. cartridges
C1AZ 19590-C
Lubricant (multi-purpose long life) -
120 Ib. keg
C1AZ 19590-D
Lubricant (multi-purpose long life) - 25 Ib. pail
C1AZ 19590-E
Lubricant (multi-purpose long life) -
(4) 5 Ib. pails
C6AZ 19590-A
Lubricant (steering linkage) - (4) 14 1/2 oz.
cartridges
C7AZ19590-A
Steering lubricant (lower arm & spindle stop
pads) - 1 Ib. can
D2AZ 19590-A
Lubricant (Teflon grease) - for F100/350,
E100/300 Trucks with 2 pc. driveline for
drive shaft yokes - 1 Ib. can
SEALERS and ADHESIVES
B9AE 19B508-A
Contact adhesive (gasket & seal) 16 oz. can
with brush
C2AZ 19C525-A
Trim cement (Vinyl adhesive) - 1 pint can
C2RZ 19C548-A
Automatic transmission & power steering
sealer - (6) 8 oz. cans
8A 19552-B
Rubber cement - (12) 5 oz. tubes (Black)
C0AZ 19552-A
Rubber cement - (12) 5 oz. tubes (light colored)
B5A 19554-A
Perfect seal sealing compound - carton of 12 -
4 oz. cans
C3AZ 19554-A
Sealant - (loctite) - 1 2/3 oz. plastic bottle
C6AZ 19554-A
Metallic Plastic (to repair cyl. front cover &
cyl. block intake manifold) (1) can - metallic
resin, (1) jar - hardening agent
continued
Symbol (in the text listings or exploded-view diagram)
indicates part is not supplied for service due to the
following:
a. Part is superseded and
replaced as indicated in the description column of text
b. Part can be improvised as indicated in the description
column of text
c. Due to it's function there would be little or no demand
-
Identifies unique Canadian part numbers and application and have been
and footnoted.
- Identifies unique U.S. part numbers and application and have been
footnoted.
- Site Admin notes (not part of the original MPC)