AFtermarket chassis
Moderator: FORDification
-
Lowell
- New Member
- Posts: 24
- Joined: Wed Jul 23, 2014 2:49 pm
AFtermarket chassis
Anyone in here using an aftermarket chassis such as No Limit or Roadster shop? Interested in getting some information if possible.
-
basketcase0302
- 100% FORDified!
- Posts: 6805
- Joined: Thu Jan 26, 2006 7:11 am
- Location: Hawthorne, Florida
Re: AFtermarket chassis
As much as I hate to send folks away from our beloved site here...Lowell
Anyone in here using an aftermarket chassis such as No Limit or Roadster shop? Interested in getting some information if possible.
If you go over to the fakebook groups "fixemyourway" and "Bumpside" you'll find one member I followed out of Hotlanta that was running his aftermarket bump chassis in time trials and making some good runs with it last I remember. Sorry I can't remember his name but there's more than one guy over there running aftermarket chassis's.
https://www.facebook.com/groups/384481208311386
https://www.facebook.com/groups/1447510322197619
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4