PS pump shaft diameter

[Bubi]

Hello,

wich different pump shaft(press fit) diameters exist?

I've bought a PS pump pulley with a 3/4" (19,05mm) inner shaft bore, but it doesnt fit cause it is to large.
The seller told me, that it fits on all pumps with press fit mounting and has no dimensions in his offer.

I need a 11/16" ID pulley.

Maybe, anyone have a pulley that fits?

Thanks and regards...

[390FE1972]

I haven't seen any info on PS pump shaft diameters, but these threads talk about the different pulley part numbers etc. The last one has a list of pulley part numbers and pulley sizes listed.

https://www.fordification.com/forum/vie ... =5&t=49485
https://www.fordification.com/forum/vie ... =5&t=54072
https://www.fordification.com/forum/vie ... =5&t=47795
http://www.fordification.com/forum/view ... =5&t=35727
https://www.fordification.com/forum/vie ... =5&t=27997
https://www.fordification.com/forum/vie ... =5&t=49294
http://www.fordification.com/partnos/pu ... erpump.htm

Regards

[71cc]

Saginaw pumps are .75 shaft and I think Thompson and C2 are 11/16