C6 Kickdown help with Sniper EFI on FE

Engine, ignition, fuel, cooling, exhaust

Moderators: Ranchero50, DuckRyder

Post Reply
SSLunatic
New Member
New Member
Posts: 3
Joined: Wed Apr 04, 2018 4:52 pm

C6 Kickdown help with Sniper EFI on FE

Post by SSLunatic »

Looking for any suggestions on how to setup a kick down lever/cable. I'm installing a Holley Sniper EFI on my 390 with a C6. The kick down stuff from my Carter AFB don't work and the Holley Sniper is setup like Chevy connections. Any ideas would be greatly appreciated.
User avatar
DuckRyder
Moderator
Moderator
Posts: 4893
Joined: Mon Jul 19, 2004 3:04 pm
Location: Scruffy City
Contact:

Re: C6 Kickdown help with Sniper EFI on FE

Post by DuckRyder »

Lokar ...
Robert
1972 F100 Ranger XLT (445/C6/9” 3.50 Truetrac)

"An unarmed man can only flee from evil, and evil is not overcome by fleeing from it." -- Jeff Cooper
WhitsEnd
Preferred User
Preferred User
Posts: 331
Joined: Tue Jun 28, 2016 8:46 am

Re: C6 Kickdown help with Sniper EFI on FE

Post by WhitsEnd »

I fabricated a bracket to hold the Lokar setup that uses 2 cables: 1 for throttle and one for kick down. The bracket bolts to the 2 factory bolt holes that the original trapeze bolted to on the intake.
Since the Sniper altered the throw and put my pedal too far off the floor, I also swapped to a Lokar pedal assembly that bolts to the floor. It is so much more comfortable.
8) 1970 F100 Ranger 2WD
:thup: project link: http://www.fordification.com/forum/view ... 22&t=83642
Zorm
Blue Oval Fan
Blue Oval Fan
Posts: 544
Joined: Tue Apr 14, 2009 1:28 pm
Location: Pensacola, Florida

Re: C6 Kickdown help with Sniper EFI on FE

Post by Zorm »

Whitsend, got pics of your setup. and those that have the sniper, how do you like it?
1971 F250 Camper Special, family owned since 1972
1983 Cherokee, last of the big ones, bought in Italy, family owned since 1998
1965 Corvair Corsa Convertible, 140 engine, 4 speed.

HE guides my path, forgives me when I stray and lights my life
User avatar
DuckRyder
Moderator
Moderator
Posts: 4893
Joined: Mon Jul 19, 2004 3:04 pm
Location: Scruffy City
Contact:

Re: C6 Kickdown help with Sniper EFI on FE

Post by DuckRyder »

Zorm,

I think he has some toward the end of his project thread.

Also, cruise the HolleyEFI forums and there is a throttle lever kit folks are using for the travel issues...
Robert
1972 F100 Ranger XLT (445/C6/9” 3.50 Truetrac)

"An unarmed man can only flee from evil, and evil is not overcome by fleeing from it." -- Jeff Cooper
Post Reply