70 Custom--It's HOME

[67mann]

Nice work on the Valance Brackets. I really like the look on that liner on the inside of the hood, what brand is it?

Thx Paul... the stuff I sprayed before this picture is
https://www.dominionsureseal.com/produc ... -bedliner/

It goes on nice and it's thick but, it dry's smooth so I recoated over top of that with
https://www.rustoleum.com/product-catal ... ing-spray/

I'm happy I did it... it seems a little thinner but, the end result is more gritty

[basketcase0302]

Looking good Jerry, specially the hood!
Paint was the one main thing I needed to finish BC #16 that never got done, (by the way a guy named Todd from New York drove down to Tn and bought it from me when I sold it-keep an eye out for my old tan 71' DRW with aluminum flat bed up there).

You did put me in your "new" last will and testament, (as the truck owner) when you pass right hee hee?!

[67mann]

Looking good Jerry, specially the hood!
Paint was the one main thing I needed to finish BC #16 that never got done, (by the way a guy named Todd from New York drove down to Tn and bought it from me when I sold it-keep an eye out for my old tan 71' DRW with aluminum flat bed up there).

You did put me in your "new" last will and testament, (as the truck owner) when you pass right hee hee?!

What part of the city was he from

By the time I get it done, due to climate change it'll be illegal to own

[JWW]

I’m digging those bucket seats. Those are cool.

[67mann]

I’m digging those bucket seats. Those are cool.

Thx ... It really helps having a childhood friend that, is also a mustang nut not sure why I didn't start this way
My buddy just fabricated these for me
http://www.fordification.com/tech/bucketseats.htm
The seats may take awhile(guy is good but, slow)to get back.

[hfdco4]

I printed off those drawings and have thought about building a set. But first I have to get more done.

[67mann]

I printed off those drawings and have thought about building a set. But first I have to get more done.

I haven't seen them yet but, apparently they were able to take those cad drawings and make them flat, so the machine cut them out profiled and marked where they needed to be bent go figure.... I know I couldn't fab 'm

[sargentrs]

Looking good Jerry! As for the seats, I stripped mine down to the bare frame, blasted every square inch and coated them with Rust Encapsulator and Eastwood Gloss Chassis Black. Rebuilt the slides and made sure everything worked freely. In hindsight I could of bought new slides from CJ Pony and had new ones but it was a fun project. My plan was to get '68 Sport foam from TMI for added bolster support. Local upholstery shop quoted me $150 ea installed for new upholstery.

[67mann]

Boy how time does go by ..Sorry no pic's and to that point. Photobucket is up my arse to pay them .So most of my project is going to disappear cause I ain't payin I'll get some pic's up,not much has changed. Got a windshield and back window, headliner but, that's about it for progress....well the front clip got mocked up and marked & is now back in pieces

[hfdco4]

Well with the good weather coming, you can get some more progress pictures.

[basketcase0302]

=67mann
Boy how time does go by ..Sorry no pic's and to that point. Photobucket is up my arse to pay them .So most of my project is going to disappear cause I ain't payin I'll get some pic's up,not much has changed. Got a windshield and back window, headliner but, that's about it for progress....well the front clip got mocked up and marked & is now back in pieces

Nice to hear from you old friend, and yes I too said goodbye to 8 years of documented pic when photobomb held my pics hostage for ransom!
You gotta be getting close Jerry?

[67mann]

So you remember these(2021)

new seats.jpg

Well they were done by hand...no kit took a little time 2023

Brackets were made from the C.A.D. drawing on here

20230616_184055 (450 x 600).jpg

20230616_184130 (450 x 600).jpg

So the progress is slow but, I'm still with HOPE

[JWW]

those look awesome.

[hfdco4]

Great to see those pics!