1969 Ford Crew Cab / Cummins Project

Post progress reports on your project truck(s)

Moderator: FORDification

User avatar
HRDROKN
Preferred User
Preferred User
Posts: 384
Joined: Mon Jul 09, 2007 3:39 pm
Location: California, Vacaville

1969 Ford Crew Cab / Cummins Project

Postby HRDROKN » Wed Jul 11, 2007 8:52 am

I decide to start a new thread to post pics and updates....

Arrival... from Arizona to California.

Image

Image

Image
Last edited by HRDROKN on Sat Oct 27, 2007 2:43 pm, edited 1 time in total.
'69 Ford Cummins Crew Cab... Built 6BT main & head studs, ported & oringed head, springs, Ti retainers, marine cam, tweaked P7100, 4K gov kit, NV4500 w/1.375" input, Southbend 3600# DD clutch, NP271 w/SYE, D60 HP front, high steer, 16" coilovers & 4-link, D80 w/disc rear, 4.10's & LSD, spinning 38" x 14.fiddy's on classic slots..... more coming!


viewtopic.php?t=23267

User avatar
HRDROKN
Preferred User
Preferred User
Posts: 384
Joined: Mon Jul 09, 2007 3:39 pm
Location: California, Vacaville

re: 1969 Ford Crew Cab / Cummins Project

Postby HRDROKN » Wed Jul 11, 2007 9:01 am

Started working on the floor...

Image

Image

Image

Image
Last edited by HRDROKN on Sat Oct 27, 2007 2:47 pm, edited 1 time in total.
'69 Ford Cummins Crew Cab... Built 6BT main & head studs, ported & oringed head, springs, Ti retainers, marine cam, tweaked P7100, 4K gov kit, NV4500 w/1.375" input, Southbend 3600# DD clutch, NP271 w/SYE, D60 HP front, high steer, 16" coilovers & 4-link, D80 w/disc rear, 4.10's & LSD, spinning 38" x 14.fiddy's on classic slots..... more coming!


viewtopic.php?t=23267

Mooosman
New Member
New Member
Posts: 144
Joined: Thu Jul 20, 2006 10:17 pm
Location: Las Vegas, NV

re: 1969 Ford Crew Cab / Cummins Project

Postby Mooosman » Wed Jul 11, 2007 9:26 am

Looks like a nice project. Are you going to use the 6BT Cummins out of a Dodge pickup, or the 4BT Cummins 4 cylinder?

Nick
1972 F-100 Custom SWB

User avatar
HRDROKN
Preferred User
Preferred User
Posts: 384
Joined: Mon Jul 09, 2007 3:39 pm
Location: California, Vacaville

Re: re: 1969 Ford Crew Cab / Cummins Project

Postby HRDROKN » Wed Jul 11, 2007 10:30 am

Mooosman wrote:Looks like a nice project. Are you going to use the 6BT Cummins out of a Dodge pickup, or the 4BT Cummins 4 cylinder?

Nick


I will be using a 6BT.... with compound (twin) turbos to the tune of about 600HP :thup:
'69 Ford Cummins Crew Cab... Built 6BT main & head studs, ported & oringed head, springs, Ti retainers, marine cam, tweaked P7100, 4K gov kit, NV4500 w/1.375" input, Southbend 3600# DD clutch, NP271 w/SYE, D60 HP front, high steer, 16" coilovers & 4-link, D80 w/disc rear, 4.10's & LSD, spinning 38" x 14.fiddy's on classic slots..... more coming!


viewtopic.php?t=23267

User avatar
marz68
Blue Oval Guru
Blue Oval Guru
Posts: 1387
Joined: Sat Dec 03, 2005 2:25 am
Location: California, Northridge
Contact:

Postby marz68 » Wed Jul 11, 2007 10:40 am

That truck alredy looks mean :twisted: can't wait to see it once your done.
were in cali are you from?
Image

User avatar
MadMaxetc
Blue Oval Fanatic
Blue Oval Fanatic
Posts: 850
Joined: Wed Jan 03, 2007 10:48 pm
Location: Kansas, Wichita
Contact:

Postby MadMaxetc » Wed Jul 11, 2007 11:09 am

That thing is so cool. I what one.

Looks good man.

Keep us posted!
Dan

Project: '63 F-100 LWB / 460 / C6 / 2x4 / Work In Progress!
Daily Driver: '67 F-250 Converted to F-100 LWB / 300 / T-5 / 9" 3.70:1 / 235/75R15 Tires
1/4 mile in 17.64s @ 75mph (it's 4200lbs!!!)
"Work Harder! Millions On Welfare Depend On YOU!!"

FORD Girl

Photobucket Pictures

User avatar
HRDROKN
Preferred User
Preferred User
Posts: 384
Joined: Mon Jul 09, 2007 3:39 pm
Location: California, Vacaville

Postby HRDROKN » Wed Jul 11, 2007 11:15 am

marz68 wrote:That truck alredy looks mean :twisted: can't wait to see it once your done.
were in cali are you from?


Thanks!

Vacaville

8)
'69 Ford Cummins Crew Cab... Built 6BT main & head studs, ported & oringed head, springs, Ti retainers, marine cam, tweaked P7100, 4K gov kit, NV4500 w/1.375" input, Southbend 3600# DD clutch, NP271 w/SYE, D60 HP front, high steer, 16" coilovers & 4-link, D80 w/disc rear, 4.10's & LSD, spinning 38" x 14.fiddy's on classic slots..... more coming!


viewtopic.php?t=23267

User avatar
theskytoucher
Preferred User
Preferred User
Posts: 471
Joined: Wed Jun 07, 2006 2:53 pm
Location: Arizona, Cottonwood
Contact:

re: 1969 Ford Crew Cab / Cummins Project

Postby theskytoucher » Wed Jul 11, 2007 11:35 pm

IS that the truck that was on the Phoenix Craiglist? If so im glad to know that it is going into good Fordification hands!!!! As you might have read that is the truck that got me interested in Bumpsides!!!! Have fun with it!!!!
-Troy-

1996 Dodge ram 1500 4x4
1976 Ford F-150 4x4

Quando Omni Flunkus Mortadi
When all else Fails Play Dead

User avatar
HRDROKN
Preferred User
Preferred User
Posts: 384
Joined: Mon Jul 09, 2007 3:39 pm
Location: California, Vacaville

re: 1969 Ford Crew Cab / Cummins Project

Postby HRDROKN » Thu Jul 12, 2007 12:24 am

Yep, that would be the same truck... 1600 miles to get her home!

:wink:
'69 Ford Cummins Crew Cab... Built 6BT main & head studs, ported & oringed head, springs, Ti retainers, marine cam, tweaked P7100, 4K gov kit, NV4500 w/1.375" input, Southbend 3600# DD clutch, NP271 w/SYE, D60 HP front, high steer, 16" coilovers & 4-link, D80 w/disc rear, 4.10's & LSD, spinning 38" x 14.fiddy's on classic slots..... more coming!


viewtopic.php?t=23267

User avatar
theskytoucher
Preferred User
Preferred User
Posts: 471
Joined: Wed Jun 07, 2006 2:53 pm
Location: Arizona, Cottonwood
Contact:

re: 1969 Ford Crew Cab / Cummins Project

Postby theskytoucher » Thu Jul 12, 2007 12:35 am

Well have fun with her!!!! It used to have an F-600 gauge panel in it and the interior was alot better but hey its still a decent truck!!!
-Troy-

1996 Dodge ram 1500 4x4
1976 Ford F-150 4x4

Quando Omni Flunkus Mortadi
When all else Fails Play Dead

User avatar
rjewkes
100% FORDified!
100% FORDified!
Posts: 3715
Joined: Sun Apr 17, 2005 1:09 am
Location: Missouri, Webb City
Contact:

Postby rjewkes » Thu Jul 12, 2007 12:40 am

HardRockin Nice truck welcome aboard.

hope to be building a crew in the future. i'll likely stay with the 390 may go to 411 i don't know perhaps we can share some build up stories sometime.

and please use the engine forum to let us all know about the 6bt upgrade. :thup:
"It is better to keep your mouth shut and appear stupid than to open it and remove all doubt." - Mark Twain
'70 f250 4x4 Crew cab 460/C6 '72 F100 390/C6 9.8 MPG AVG. '89 Mercury Cougar LS Dual Exh. V6 . 18.9 MPG AVG. In Town.
Image
I don't want to give em a heart-attack. That is what would happen if I answered the door in the buff. Heck it almost scares me to death when I step out of the shower and look in the mirror.~Mancar1~
fuelly.com

User avatar
19674x4
Blue Oval Fanatic
Blue Oval Fanatic
Posts: 900
Joined: Mon Jun 27, 2005 12:31 am
Location: Oakland Oregon/Sheridan Wyoming

Postby 19674x4 » Thu Jul 12, 2007 1:23 pm

sickness, looks like we got two sky high crews on here now. im diggin the idea of the 6BT. im jealous
Just Ledoux It- R.I.P Chris
My Photo Album
2008 Ram 2500 Cummins..Deleted and added more power goodies
1967 F-250 highboy 352, np435(((((((sold)))))))))
1968 F100 SWB. 360, np-435, flatbed
1971 F-100 4x4 Step-side. 360, np-435
1972 F250 highboy...new project. True 390, np-435

User avatar
rjewkes
100% FORDified!
100% FORDified!
Posts: 3715
Joined: Sun Apr 17, 2005 1:09 am
Location: Missouri, Webb City
Contact:

Postby rjewkes » Thu Jul 12, 2007 2:02 pm

wait just wait i may take mine sky high if it ain't, course gotta buy it and bring it home first.
"It is better to keep your mouth shut and appear stupid than to open it and remove all doubt." - Mark Twain
'70 f250 4x4 Crew cab 460/C6 '72 F100 390/C6 9.8 MPG AVG. '89 Mercury Cougar LS Dual Exh. V6 . 18.9 MPG AVG. In Town.
Image
I don't want to give em a heart-attack. That is what would happen if I answered the door in the buff. Heck it almost scares me to death when I step out of the shower and look in the mirror.~Mancar1~
fuelly.com

User avatar
460 crew
Blue Oval Guru
Blue Oval Guru
Posts: 1126
Joined: Fri Mar 25, 2005 10:03 pm
Location: Nevada, Las Vegas
Contact:

re: 1969 Ford Crew Cab / Cummins Project

Postby 460 crew » Thu Jul 12, 2007 6:37 pm

:clap: :clap: Very nice you have my crew lookin like a terd now. :lol:
1970 4x4 Crewcab build and 12v cummins conversion
viewtopic.php?f=22&t=17179

User avatar
HRDROKN
Preferred User
Preferred User
Posts: 384
Joined: Mon Jul 09, 2007 3:39 pm
Location: California, Vacaville

Re: re: 1969 Ford Crew Cab / Cummins Project

Postby HRDROKN » Thu Jul 12, 2007 8:42 pm

460 crew wrote::clap: :clap: Very nice you have my crew lookin like a terd now. :lol:


No way, I was noticing that you had two crews out front.... some guys have all the luck! :thup:
'69 Ford Cummins Crew Cab... Built 6BT main & head studs, ported & oringed head, springs, Ti retainers, marine cam, tweaked P7100, 4K gov kit, NV4500 w/1.375" input, Southbend 3600# DD clutch, NP271 w/SYE, D60 HP front, high steer, 16" coilovers & 4-link, D80 w/disc rear, 4.10's & LSD, spinning 38" x 14.fiddy's on classic slots..... more coming!


viewtopic.php?t=23267


Return to “Project Updates”

Who is online

Users browsing this forum: No registered users