Bed side panels

Moderator: FORDification

Post Reply
M-100
New Member
New Member
Posts: 168
Joined: Fri Nov 28, 2008 7:35 pm

Bed side panels

Post by M-100 »

Been looking around for bed side panels to repair rust . Does anybody make these
User avatar
basketcase0302
100% FORDified!
100% FORDified!
Posts: 6805
Joined: Thu Jan 26, 2006 7:11 am
Location: Hawthorne, Florida

Re: Bed side panels

Post by basketcase0302 »

"M-100"]Been looking around for bed side panels to repair rust . Does anybody make these
Page 23 :wink:
http://www.lmctruck.com/icatalog/fb/full.aspx?Page=23
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
M-100
New Member
New Member
Posts: 168
Joined: Fri Nov 28, 2008 7:35 pm

Re: Bed side panels

Post by M-100 »

For comparison what would be a reasonable price for a good bed
User avatar
basketcase0302
100% FORDified!
100% FORDified!
Posts: 6805
Joined: Thu Jan 26, 2006 7:11 am
Location: Hawthorne, Florida

Re: Bed side panels

Post by basketcase0302 »

"M-100"]For comparison what would be a reasonable price for a good bed
Probably better answered on where you live as i find rust free bumps here for less than $1K all day long, (I'd buy every last one of them if i won the lottery tomorrow LOL)! :D
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
User avatar
jzjames
100% FORDified!
100% FORDified!
Posts: 1761
Joined: Sun Jan 09, 2005 2:59 pm
Location: Washington, Windy Point

Re: Bed side panels

Post by jzjames »

M-100 wrote:For comparison what would be a reasonable price for a good bed
$350.
User avatar
cstoyer
New Member
New Member
Posts: 201
Joined: Wed Jul 08, 2015 9:32 am
Location: NW PA

Re: Bed side panels

Post by cstoyer »

In Pennsylvania you will pay $600. That’s is for a bed trucked in from the West or South. Few places around here do that.

Cstoyer
68 F250 4x4
Post Reply