1972 F100 inner fenders

Moderator: FORDification

Post Reply
mn1972f100
New Member
New Member
Posts: 5
Joined: Tue Mar 14, 2017 3:13 pm

1972 F100 inner fenders

Post by mn1972f100 »

Do they make bolt in inner fenders for 1972 f100's or do you need to cut and weld them? I've seen what appears to be 2 versions. When I say inner fender I'm talking where the hood hinge mount so.
User avatar
sargentrs
100% FORDified!
100% FORDified!
Posts: 9866
Joined: Fri Jun 22, 2007 9:30 am
Location: Georgia, Jasper

Re: 1972 F100 inner fenders

Post by sargentrs »

Our inner fenders are bolt in. DC sells them. http://dennis-carpenter.com/front-fende ... Z-16054-A/ I would assume the other normal vendors do too.
Randy
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
Wilfred of Ivanhoe
New Member
New Member
Posts: 192
Joined: Wed Dec 09, 2015 5:06 pm
Location: Oklahoma

Re: 1972 F100 inner fenders

Post by Wilfred of Ivanhoe »

:yt: They aren't hard to come by if you look at the usual suppliers.
1953 F100 (Waitint for attention)
1969 F100 LWB w/ 72 grille (Daily driver & work truck)
1969 F100 LWB Parts truck
1971 F100 SSWB 4x4 (Current Project)
2016 Jeep Wrangler Unlimited Sport (Actually the wife's)
mn1972f100
New Member
New Member
Posts: 5
Joined: Tue Mar 14, 2017 3:13 pm

Re: 1972 F100 inner fenders

Post by mn1972f100 »

Thanks all, I had ran into some on LMC that looked weld in but wanted to confirm the bolt in version ran around $199.
Lone Ranger
Blue Oval Fan
Blue Oval Fan
Posts: 663
Joined: Tue Jun 21, 2016 2:27 pm
Location: Northern Michigan

Re: 1972 F100 inner fenders

Post by Lone Ranger »

I got galvanized ones off eBay for 199$. Being galvanized they should never rust. I think the 73 - 79 ones will also work. You might have to trim them a little bit tho.
1972 f100 4x4 4 inch lift with dump box kit-sold
1969 f250 4x4 highboy in progress.
http://www.fordification.com/forum/view ... 22&t=85251
Kyle
User avatar
67mann
100% FORDified!
100% FORDified!
Posts: 1698
Joined: Thu Feb 07, 2008 7:19 am
Location: NY..Mt.Morris 3rdgen. homestead

Re: 1972 F100 inner fenders

Post by 67mann »

Lone Ranger wrote: I think the 73 - 79 ones will also work. You might have to trim them a little bit tho.


Inner fenderwells - All '67-'72 F100 thru F350 inner fenderwells will interchange. However, the inner fenderwells of 2WD trucks have a longer skirt than those of the 4WD trucks, but they can be trimmed to fit 2WD trucks. The left-side fenderwell on trucks equipped with an Onan generator are notched for the generator set-up.

'73-'79 inner fenderwells can be made to fit, but require some tweaking. You'll need the matching hood hinges and firewall brackets (which are narrower than the '67-'72 brackets).
:thup:
I've had enough and I'm not alone
http://s267.photobucket.com/albums/ii304/67mann/
Post Reply