restoring old paint

Moderator: FORDification

Post Reply
red71ford
New Member
New Member
Posts: 6
Joined: Sun Nov 30, 2014 8:46 pm

restoring old paint

Post by red71ford »

The shine is pretty much gone by now on the old 71. What's the best way to bring it back?
AZf100
Preferred User
Preferred User
Posts: 367
Joined: Mon Jan 28, 2013 10:46 am
Location: Phoenix AZ

Re: restoring old paint

Post by AZf100 »

I'm not a paint and body guy but Pictures will help to know exactly what your dealing with.
"I ain't as good as I once was But I'm as good once as I ever was"
http://i1364.photobucket.com/albums/r73 ... 6e738a.jpg
1971 F100 SWB 302 2WD (Work In Progress)
2010 F250 4X4 6.4 Power Stroke / lariat Black
tac
Preferred User
Preferred User
Posts: 443
Joined: Mon Jun 03, 2013 10:50 am
Location: Dallas/Ft. Worth

Re: restoring old paint

Post by tac »

Original paint? Rubbing and/or polishing compound to cut the oxidized paint off of the surface.
rwilly
Preferred User
Preferred User
Posts: 250
Joined: Sun Jan 13, 2013 5:30 pm
Location: Seattle

Re: restoring old paint

Post by rwilly »

True or not, I don't know..but I was told that the paint on the old vehicles being Lacquer can be kept shiny by using a little bit of kerosene on it.
tac
Preferred User
Preferred User
Posts: 443
Joined: Mon Jun 03, 2013 10:50 am
Location: Dallas/Ft. Worth

Re: restoring old paint

Post by tac »

Only GM used Lacquer then. Ford and Chrysler used Acrylic Enamel. Spray oil or kerosene on anything will make it shiny temporarily until dust hits it. Was trick used car lot would use to make a engine compartment look new. Never heard of it being used on the outside I personally wouldn't do it. It will smell like kerosene.
User avatar
jzjames
100% FORDified!
100% FORDified!
Posts: 1765
Joined: Sun Jan 09, 2005 2:59 pm
Location: Washington, Windy Point

Re: restoring old paint

Post by jzjames »

Try cleaning the paint with laquer thinner. Dont be scared.
M-100
New Member
New Member
Posts: 168
Joined: Fri Nov 28, 2008 7:35 pm

Re: restoring old paint

Post by M-100 »

If the paint is just oxidized you can use a buffer and compound and get great results. You will needa real buffer not an orbital and be careful on the edges of panels and body lines you will see primer if you stay on edges to long so keep moving and don't force things. Do not do this in direct sun on a hot day. Then if the shine comes back give it a good coat of wax. I have seen a few factory ford paint jods come back .
Post Reply