Seats are not the same

Inside the cab...appearance, repair, upgrades

Moderator: FORDification

Post Reply
fordman
100% FORDified!
100% FORDified!
Posts: 22329
Joined: Sun Aug 28, 2005 8:17 pm
Location: Kansas, Ottawa
Contact:

Seats are not the same

Post by fordman »

Y 67 seat springs reseemble a old bed spring matress. It needs a new cushion. So i went to the jy and took the cushion out of a 74 dentside. And the dentside bottom springs are more along the line of newer trucks. Not like a matress at all. Im probably going to just have to buy a seat kit now from lmc truck. I hope the seat springs didnt change until after 73.
User avatar
basketcase0302
100% FORDified!
100% FORDified!
Posts: 6805
Joined: Thu Jan 26, 2006 7:11 am
Location: Hawthorne, Florida

Re: Seats are not the same

Post by basketcase0302 »

By far one of the best upgrades I did to my 71' was to install the seat from a 79' dent into it.
Difference between night and day as far as how comfortable it was.
Am surprised they aren't close enough for the bottom covers to work / interchange though. :hmm:
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
User avatar
jzjames
100% FORDified!
100% FORDified!
Posts: 1761
Joined: Sun Jan 09, 2005 2:59 pm
Location: Washington, Windy Point

Re: Seats are not the same

Post by jzjames »

basketcase0302 wrote:one of the best upgrades I did was to install the seat from a 79' dent into it.
Difference between night and day
Absolutely.
User avatar
jzjames
100% FORDified!
100% FORDified!
Posts: 1761
Joined: Sun Jan 09, 2005 2:59 pm
Location: Washington, Windy Point

Re: Seats are not the same

Post by jzjames »

Double post
User avatar
Jacksdad
Blue Oval Fan
Blue Oval Fan
Posts: 579
Joined: Sat Mar 30, 2013 8:52 pm
Location: San Diego, CA

Re: Seats are not the same

Post by Jacksdad »

My '71 is wearing the rear bench seat from an '89 crew cab, and I couldn't be happier. Took half an hour to switch to bump runners and it was a bolt in.
1971 DRW F350 cab and chassis with an Open Road motorhome conversion, Dana 70, 352 (originally 390)/C6, PS, power front discs, and 159" w/b.
fordman
100% FORDified!
100% FORDified!
Posts: 22329
Joined: Sun Aug 28, 2005 8:17 pm
Location: Kansas, Ottawa
Contact:

Re: Seats are not the same

Post by fordman »

It's funny my seat is different. I saw a slick today that had the same spring bottom as a 68 f600 that I looked at too.
Something I am wondering is if the seat springs was part of the ranger package my 67 has. I would think if it was a package deal. Then I should have the heavier duty seat.
Post Reply