Proper Care for Interior Parts

Inside the cab...appearance, repair, upgrades

Moderator: FORDification

Post Reply
User avatar
hdman90
Preferred User
Preferred User
Posts: 382
Joined: Thu Mar 19, 2015 8:34 am
Location: Erie, Pa
Contact:

Proper Care for Interior Parts

Post by hdman90 »

Recently came upon a brand new floor mat for my truck, but it has been in the box so long that the folds are beginning to crack. Before I unfold it, should I soak it in water or cover in Vaseline? I would hate to damage it more by simply wanting to use it!
Also, I have a '67 radio delete plate (that I do not plan on using, but would like to keep in good shape) that has lost it's shine. I have tried waxing it, but that does not seem to do the trick. Does anyone know how to bring a good permanent shine back to old plastic?

Thanks!
1969 F-100 LWB 2wd 240 3spd manual
1969 F-250 LWB 4wd 360 4spd manual
1976 F-250 Supercab LWB 2wd 390 4spd manual
User avatar
HIO Silver
100% FORDified!
100% FORDified!
Posts: 1970
Joined: Sat Jul 23, 2011 11:31 pm
Location: Devil's Mountain, CA

Re: Proper Care for Interior Parts

Post by HIO Silver »

Warm it up before unfolding.

I'd glue a flexible matrix to the back to prevent tearing where it has dry-cracked.

Vaseline seems to be a good idea but using a lubricant or protectant requires that it be used consistently and forever.
70 F100 LB 2WD, 360FE, E-Street EFI, TKO-500, 76K original miles.. follow my rebuild: The Lo-Buck Bumpside
71 F250 LB, 2WD, 360FE, T18, PS, PB, D60 with 4.11s
73 F100 SB 4WD, 390FE, NP435, +4 on 35s

01 Ferrari 360 Spider F1
01 F150 SuperCrew Lariat 4WD
01 PT Cruiser Limited (DD)
68 Mustang
65 Mustang
User avatar
Ranchero50
Moderator
Moderator
Posts: 5799
Joined: Wed Nov 08, 2006 7:02 pm
Location: Maryland, Hagerstown
Contact:

Re: Proper Care for Interior Parts

Post by Ranchero50 »

I used baby oil on my vinyl parts and I agree, put a backer on it. Mine is in pretty good shape and has carpet underneath for padding.
'70 F-350 CS Cummins 6BT 10klb truck 64k mile Bahama Blue

Contact me for CNC Dome Lamp Bezels and Ash Tray pulls.
Post Reply