Bench Seat Foam Replacement

Inside the cab...appearance, repair, upgrades

Moderator: FORDification

Post Reply
Madman
100% FORDified!
100% FORDified!
Posts: 1671
Joined: Thu Oct 13, 2011 9:39 am
Location: Windsor, CO
Contact:

Bench Seat Foam Replacement

Post by Madman »

As I am moving along in my project, time to do some research. I do not see a viable (easy and cheap) replacement foam for the bench seat overhaul. What have you lads done? Buy bulk foam and trim it down? Any secret vendors? Any suggestion on the foam to get if it is a trim it yourself project?

Any help is always appreciated1
""Never shoot a large caliber man with a small caliber bullet."

2017 Ford Raptor
1970 F250 4x4
1948 Willys CJ2A w/ Ford Flathead V-8
1975 Ford Bronco
User avatar
colnago
100% FORDified!
100% FORDified!
Posts: 1882
Joined: Tue Jun 14, 2011 8:48 pm
Location: Ridgecrest, CA

Re: Bench Seat Foam Replacement

Post by colnago »

I used bulk foam and trimmed it down. I also tried using spray-on foam cement to put foam around the edges and keep it in place, but it wouldn't stick. I went to a place that sold auto upholstery supplies, and bought the firmest foam they sold. When it came time to put it all together, I put a layer of canvas between the springs and the foam, to help keep the springs from damaging the foam.

Joseph
"Sugar", my 1967 Ford F250 2WD Camper Special, 352FE, Ford iron "T" Intake with 1405 Edelbrock, Duraspark II Ignition, C6 transmission, front disc brake conversion.
User avatar
jimmy828
100% FORDified!
100% FORDified!
Posts: 1611
Joined: Thu Dec 23, 2010 6:47 pm
Location: asheville,NC

Re: Bench Seat Foam Replacement

Post by jimmy828 »

I used bulk 1inch thick foam,2 inch cotton/polyester matting to go top of foam, jute webbing to take place of all them wires on frame, welded any broken springs, and hog rings to install material mentioned. Thought it turned out pretty good with using a aftermarket cover.
You do not have the required permissions to view the files attached to this post.
Madman
100% FORDified!
100% FORDified!
Posts: 1671
Joined: Thu Oct 13, 2011 9:39 am
Location: Windsor, CO
Contact:

Re: Bench Seat Foam Replacement

Post by Madman »

Thank you Lads! All good input!
""Never shoot a large caliber man with a small caliber bullet."

2017 Ford Raptor
1970 F250 4x4
1948 Willys CJ2A w/ Ford Flathead V-8
1975 Ford Bronco
Post Reply