1970 front axle
Moderator: FORDification
-
- New Member
- Posts: 32
- Joined: Sun Jul 17, 2011 7:01 pm
1970 front axle
I have a 1970 f-250,not a 4-wheel drive, i stopped by the parts store to ask about replacing the tie rod ends & shocks they told me they need to know the front axle rating if it was 3000 or 3500 pound axles where do i find ,that info for them all i have is the twin I beam in the front
- HIO Silver
- 100% FORDified!
- Posts: 1970
- Joined: Sat Jul 23, 2011 11:31 pm
- Location: Devil's Mountain, CA
Re: 1970 front axle
Go look at the 1970 factory literature (linked above in the toolbar) and go to page 16. Yes, the front does have a weight rating even in 2WD.
Here's the path: http://www.fordification.com/library/ma ... ewsIndex=1
Here's the path: http://www.fordification.com/library/ma ... ewsIndex=1
70 F100 LB 2WD, 360FE, E-Street EFI, TKO-500, 76K original miles.. follow my rebuild: The Lo-Buck Bumpside
71 F250 LB, 2WD, 360FE, T18, PS, PB, D60 with 4.11s
73 F100 SB 4WD, 390FE, NP435, +4 on 35s
01 Ferrari 360 Spider F1
01 F150 SuperCrew Lariat 4WD
01 PT Cruiser Limited (DD)
68 Mustang
65 Mustang
71 F250 LB, 2WD, 360FE, T18, PS, PB, D60 with 4.11s
73 F100 SB 4WD, 390FE, NP435, +4 on 35s
01 Ferrari 360 Spider F1
01 F150 SuperCrew Lariat 4WD
01 PT Cruiser Limited (DD)
68 Mustang
65 Mustang
- basketcase0302
- 100% FORDified!
- Posts: 6805
- Joined: Thu Jan 26, 2006 7:11 am
- Location: Hawthorne, Florida
Re: 1970 front axle
To add to above won't the VIN plate on the door also have it listed? I know the rear axle code and GVW is listed there:
http://www.fordification.com/tech/vin_find.htm
http://www.fordification.com/tech/vin_find.htm
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4