67 to,72 3 speed trans

Clutch, transmission, rear axle

Moderators: FORDification, 70_F100

Post Reply
junkyardjeff
New Member
New Member
Posts: 149
Joined: Sun Aug 15, 2004 10:38 am
Location: Dayton Ohio

67 to,72 3 speed trans

Post by junkyardjeff »

I am going to put a 302 and 3 speed in my 66 after I remove the 460 and since I do not have a trans I will have to hunt one down,what I need to know are the 67 to 72 3 speed trans made for a slip yoke or do they have a fixed yoke like the 4 speeds.
Mach428
Blue Oval Fan
Blue Oval Fan
Posts: 711
Joined: Sat Nov 12, 2005 6:00 am

Re: 67 to,72 3 speed trans

Post by Mach428 »

I have an extra 3-speed trans. I don't know where you live but I'm in north central Florida. PM if interested
daveford72
New Member
New Member
Posts: 140
Joined: Wed Nov 25, 2009 12:43 pm
Location: Pennsylvania
Contact:

Re: 67 to,72 3 speed trans

Post by daveford72 »

All the 3 speeds I have taken out from 67 - 72 had bolt ons. I dont know if they where all like that from the factory or not :hmm:
junkyardjeff
New Member
New Member
Posts: 149
Joined: Sun Aug 15, 2004 10:38 am
Location: Dayton Ohio

Re: 67 to,72 3 speed trans

Post by junkyardjeff »

I could go with the fixed yoke since it does have a two piece drive shaft but thinking about going one piece,it all depends on what I can get the cheapest.
M-100
New Member
New Member
Posts: 168
Joined: Fri Nov 28, 2008 7:35 pm

Re: 67 to,72 3 speed trans

Post by M-100 »

I had a short wheel base with a slip yoke three speed and a long wheel base with a bolt on yoke three speed . I have a nice bolt on yoke three speed for sale cheap if you want.
Post Reply