C6 column shift linkage bushings

Clutch, transmission, rear axle

Moderators: FORDification, 70_F100

Post Reply
dos0711
New Member
New Member
Posts: 12
Joined: Fri Jan 15, 2016 6:32 am

C6 column shift linkage bushings

Post by dos0711 »

I must be missing something. I've tried to find bushings for the automatic column shift linkage and can't seem to find any. Now, that may be a stupid question but could someone steer me in the right direction? Specifically the one at the transmission. Tons of slop as it is missing. If the year, make and model make a difference, it's a 1969 F100 360 C6.

Thanks for any help
User avatar
Ranchero50
Moderator
Moderator
Posts: 5799
Joined: Wed Nov 08, 2006 7:02 pm
Location: Maryland, Hagerstown
Contact:

Re: C6 column shift linkage bushings

Post by Ranchero50 »

NAPA can get them. Measure the hole and pin diameter with a caliper to get the correct one. Probably won't be vehicle specific and go during the day when they are slower, not on a weekend or evening.
'70 F-350 CS Cummins 6BT 10klb truck 64k mile Bahama Blue

Contact me for CNC Dome Lamp Bezels and Ash Tray pulls.
User avatar
basketcase0302
100% FORDified!
100% FORDified!
Posts: 6805
Joined: Thu Jan 26, 2006 7:11 am
Location: Hawthorne, Florida

Re: C6 column shift linkage bushings

Post by basketcase0302 »

Dang I used to have a source for these years ago as I had an F-100 that had linkage issues that ate them like candy.
Was really surprised to not see them in a few different places I looked online. :(
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
Post Reply