swapping out C4 to a T5 in 67 f100

Clutch, transmission, rear axle

Moderators: FORDification, 70_F100

caya1382
New Member
New Member
Posts: 15
Joined: Mon May 19, 2014 5:49 pm
Location: dallas texas

swapping out C4 to a T5 in 67 f100

Postby caya1382 » Sat Mar 11, 2017 2:02 pm

Out looking around for a T5 to swap out my C4. In my 1967 f100.
Any ideas of what I will will be needing. Any issues anyone ran into?
I know I need the T5 will my C4 bell housing work or ??
Can I use my same trans mount? I know I need a new pedal assembly.
Any issues with the floor shifter hitting the bench seat?

User avatar
Ranchero50
Moderator
Moderator
Posts: 5226
Joined: Wed Nov 08, 2006 7:02 pm
Location: Maryland, Hagerstown
Contact:

Re: swapping out C4 to a T5 in 67 f100

Postby Ranchero50 » Sat Mar 11, 2017 5:41 pm

Google it, there's a ton of info out there on swaps. C4 bell, nope. Clutch assy maybe if you find the correct push style (rod) vs pull style (cable) bell. Flywheel for a 28oz imbalance needed.

I'll try to add more later.
'70 F-350 CS Cummins 6BT 10klb truck 64k mile Bahama Blue

Contact me for CNC Dome Lamp Bezels and Ash Tray pulls.

Builder of dreams, breaker of hearts. Play nice or go away.

User avatar
sargentrs
100% FORDified!
100% FORDified!
Posts: 8345
Joined: Fri Jun 22, 2007 9:30 am
Location: Georgia, Jasper

Re: swapping out C4 to a T5 in 67 f100

Postby sargentrs » Sun Mar 12, 2017 6:24 am

You didn't mention what engine you have? Try this search and read up on it. https://www.google.com/search?q=t5+site ... 8&oe=utf-8 Also, some good information here. Different trans but similar application. http://www.fordification.com/tech/M5R2_5spd-swap.htm
Randy
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: viewtopic.php?f=22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1964 Ford Fairlane 500. 289/Cruise-O-Matic, A/C, P/S.

M-100
New Member
New Member
Posts: 103
Joined: Fri Nov 28, 2008 7:35 pm

Re: swapping out C4 to a T5 in 67 f100

Postby M-100 » Sun Mar 12, 2017 7:09 am

The easiest way is to use a three speed bellhousing ,clutch ,pedals,linkage that came in a three speed truck. Then get on ebay buy an adapter for a classic mustang three speed to t5. You will have to move the cross member back an inch or two. Very easy just drill two holes. And then do something with your drivsaft it may be a little short. It takes a little work but is a easy conversion.
.

caya1382
New Member
New Member
Posts: 15
Joined: Mon May 19, 2014 5:49 pm
Location: dallas texas

Re: swapping out C4 to a T5 in 67 f100

Postby caya1382 » Sun Jul 09, 2017 9:38 pm

Installed the born warner t5 and it fit perfect.

User avatar
colnago
100% FORDified!
100% FORDified!
Posts: 1594
Joined: Tue Jun 14, 2011 8:48 pm
Location: Ridgecrest, CA

Re: swapping out C4 to a T5 in 67 f100

Postby colnago » Mon Jul 10, 2017 11:58 pm

What are you going to do with the C4?

Joseph
"Sugar", my 1967 Ford F250 2WD Camper Special, 352FE, "T" Intake with 1405 Edelbrock, Duraspark II Ignition, C6 transmission, front disc brake conversion.

caya1382
New Member
New Member
Posts: 15
Joined: Mon May 19, 2014 5:49 pm
Location: dallas texas

Re: swapping out C4 to a T5 in 67 f100

Postby caya1382 » Tue Jul 11, 2017 1:52 am

Sold it

User avatar
Ranchero50
Moderator
Moderator
Posts: 5226
Joined: Wed Nov 08, 2006 7:02 pm
Location: Maryland, Hagerstown
Contact:

Re: swapping out C4 to a T5 in 67 f100

Postby Ranchero50 » Tue Jul 11, 2017 7:24 am

No pics or other tidbit on how you did it?
'70 F-350 CS Cummins 6BT 10klb truck 64k mile Bahama Blue

Contact me for CNC Dome Lamp Bezels and Ash Tray pulls.

Builder of dreams, breaker of hearts. Play nice or go away.

caya1382
New Member
New Member
Posts: 15
Joined: Mon May 19, 2014 5:49 pm
Location: dallas texas

Re: swapping out C4 to a T5 in 67 f100

Postby caya1382 » Tue Jul 11, 2017 1:04 pm

I found a t5 older one world class. And paired it with a s10 tail housing in order to not hit my bench seat. And ran a after market mustang 90's model clutch cable and put my old original clutch pedal back in and welded a 1/2 " piece of flat metal and drilled a hole in it to the side of the pedal and attached the clutch cable to it. Also had to run s10 Trans mount which caused me to have to notch a 1" out of my cross member and I just welded a flat piece of steel back in to put back some strength in the member.


Return to “Drivetrain”

Who is online

Users browsing this forum: No registered users