Am I missing the kick down lever?

Clutch, transmission, rear axle

Moderators: FORDification, 70_F100

Post Reply
User avatar
magic bus
New Member
New Member
Posts: 85
Joined: Tue Jun 28, 2016 10:01 pm
Location: Gateway to the West

Am I missing the kick down lever?

Post by magic bus »

This is the way I bought it. It's leaking fluid just sitting. I'm willing to not hook up the kick down but I need to get the nut on to stop the leak. Any thoughts or suggestions on what to use?

Will it work with a washer and a nut or does it have a square cutout to fit over the shaft?

If anybody has an extra kick down lever I'd be happy to pay

I just wanna stop the leak
IMG_4106.JPG
You do not have the required permissions to view the files attached to this post.
71 F100 2WD Longbed Sport Custom 390 C6
67 Econoline E100 200 I6 3 on the Tree
70 Mustang Coupe 302 C4

97 Expedition 4x4 Eddie Bauer
User avatar
Ranchero50
Moderator
Moderator
Posts: 5799
Joined: Wed Nov 08, 2006 7:02 pm
Location: Maryland, Hagerstown
Contact:

Re: Am I missing the kick down lever?

Post by Ranchero50 »

I don't think the lever will stop the link. It shoulders against the shaft. Should be an O ring or two sealing the oil.
'70 F-350 CS Cummins 6BT 10klb truck 64k mile Bahama Blue

Contact me for CNC Dome Lamp Bezels and Ash Tray pulls.
User avatar
magic bus
New Member
New Member
Posts: 85
Joined: Tue Jun 28, 2016 10:01 pm
Location: Gateway to the West

Re: Am I missing the kick down lever?

Post by magic bus »

I found a couple pictures detailing the inner and outer shaft seal. I'm certainly prepared to change the o rings/seals. I just need a couple pieces to finish the assembly?
71 F100 2WD Longbed Sport Custom 390 C6
67 Econoline E100 200 I6 3 on the Tree
70 Mustang Coupe 302 C4

97 Expedition 4x4 Eddie Bauer
User avatar
Ranchero50
Moderator
Moderator
Posts: 5799
Joined: Wed Nov 08, 2006 7:02 pm
Location: Maryland, Hagerstown
Contact:

Re: Am I missing the kick down lever?

Post by Ranchero50 »

Yeah, lever and self locking nut. You'll also need the kick down shaft / linkage.
'70 F-350 CS Cummins 6BT 10klb truck 64k mile Bahama Blue

Contact me for CNC Dome Lamp Bezels and Ash Tray pulls.
User avatar
sargentrs
100% FORDified!
100% FORDified!
Posts: 9866
Joined: Fri Jun 22, 2007 9:30 am
Location: Georgia, Jasper

Re: Am I missing the kick down lever?

Post by sargentrs »

You didn't mention if it was for your C6 or your C4 but from comparing to my tranny, I'm thinking that photo's of your C6. Here's a couple photos of my linkage on my C4. Probably not identical to yours but should give you a frame of reference. I have a couple more photos if you need them.
You do not have the required permissions to view the files attached to this post.
Randy
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
Post Reply