ring & pinions
Moderators: FORDification, 70_F100
-
- New Member
- Posts: 38
- Joined: Wed May 04, 2011 9:11 pm
ring & pinions
Will the same ring & pinion fit both the front & rear differentials on my '70 f=100 4x4? To change the ratio both ends need the same ratio--do they use the same parts?
-
- 100% FORDified!
- Posts: 22329
- Joined: Sun Aug 28, 2005 8:17 pm
- Location: Kansas, Ottawa
- Contact:
Re: ring & pinions
probably not. but i dont know for sure. the F100 probably has a 9 inch in the rear and a dana 44 in front. unless you got lucky and it has both a d44 in frotn and back. then i am sure the ring and pinion will interchange.
- eggman918
- Blue Oval Guru
- Posts: 1098
- Joined: Fri Nov 20, 2009 12:56 pm
- Location: Paulden,AZ.
Re: ring & pinions
I recently ordered gears for my highboy 44 front/60 rear and Summit listed a different part # for front and rear for both.So it seems that front and rear will not interchange
Steve.
Steve.
Steve
The"Filthy Beast"- '68 F-250 Crew Cab 131"W/B 4x4 4BT compounds hx30/Wh1c,5x.012" sac injectors/ZF 5/NP203-205 /3.54 44 trutrack front/60 trutrack rear on 33's. 2nd owner
"Beauty is only skin deep....Ugly is to the bone"
It is more important to understand what you don't know than what you do know,because then you can start to learn..???
"you must deal with the attaboys and the ass chewing s with your head up and looking them in the eyes" T.J.E. aka My Dad
There are only three types of people wolves, sheepdogs, and sheep. What are you?
The"Filthy Beast"- '68 F-250 Crew Cab 131"W/B 4x4 4BT compounds hx30/Wh1c,5x.012" sac injectors/ZF 5/NP203-205 /3.54 44 trutrack front/60 trutrack rear on 33's. 2nd owner
"Beauty is only skin deep....Ugly is to the bone"
It is more important to understand what you don't know than what you do know,because then you can start to learn..???
"you must deal with the attaboys and the ass chewing s with your head up and looking them in the eyes" T.J.E. aka My Dad
There are only three types of people wolves, sheepdogs, and sheep. What are you?
-
- New Member
- Posts: 25
- Joined: Sun Jun 05, 2011 5:35 pm
Re: ring & pinions
70ford1 wrote:Will the same ring & pinion fit both the front & rear differentials on my '70 f=100 4x4? To change the ratio both ends need the same ratio--do they use the same parts?
No
Actually The Frt and Rear ratio's can be off a bit , there is some discussion as to Why this is, but Ford can and will put a totally different ratio in the Frt,
To Pull you along
but different parts for sure, It is slight like 3.50 in the rear and 3.53 in Frt, or something like that