Rear spindle nuts

Clutch, transmission, rear axle

Moderators: FORDification, 70_F100

Post Reply
User avatar
F250Chris
New Member
New Member
Posts: 33
Joined: Tue Apr 04, 2006 6:40 am
Location: GERMANY, Munich

Rear spindle nuts

Post by F250Chris »

Hello,

I have to repair the brakes on my 1969 F250 Camper Special. And I´d like to replace the old jam nuts and lock washers with the "Stage8 X-lock" nuts. Does anyone know if they fit on the rear Axle? On stage8.com they don´t make any difference, but on summitracing.com they say, they are only available for 4WD front axles. I tried to contact Stage8, but they didn´t answer my Email. And what´s the correct size for the socket? I have on 2-9/16 inch socket, but that seems to be to wide.

Thanks for help
Chris

Edit: rear axle code on the VIN-tag: 38, so it´s a DANA 60
Chris
User avatar
flyboy2610
100% FORDified!
100% FORDified!
Posts: 4901
Joined: Sun Oct 03, 2004 6:42 pm
Location: Nebraska, Lincoln

Re: Rear spindle nuts

Post by flyboy2610 »

I can't help you regarding the lock nuts, but a standard 2-9/16 socket will not work. You need one of these:
http://www.amazon.com/gp/product/B001PI ... UTF8&psc=1

The walls are thinner to be able to get down in there. Good luck! :thup:
"If the women don't find you handsome, they should at least find you handy."
Red Green

If you're going to live like there's no hell...............
you'd better be right.
http://theworldasiseeit-flyboy2610.blog ... ee-it.html
User avatar
tqwrench
New Member
New Member
Posts: 155
Joined: Wed Jun 11, 2014 12:06 am
Location: Ypsilanti, MI

Re: Rear spindle nuts

Post by tqwrench »

I thought the drum retaining nuts on my rear axle were going to be 2-9/16". They WERE NOT. It seems 1969 was the year before or right before they went to thicker spindles for the rear. I wound up having to order a 2-3/8" 1/2" drive thin-wall socket to remove/install mine. I just beat the locking washer flat then used tabs that weren't used before to hold them down.
1969 F-250 390 Camper Special
Candy Apple Red/Wimbledon White
User avatar
F250Chris
New Member
New Member
Posts: 33
Joined: Tue Apr 04, 2006 6:40 am
Location: GERMANY, Munich

Re: Rear spindle nuts

Post by F250Chris »

Thanks for your help.
Meanwhile I got an answer. Maybe someone is interested:

Hello Christoph,

Yes the X-Lock will fit on both front and rear axles. Because the rear axles can use different hubs you will need to check for proper clearance before using the X-Lock on a rear axle. Part number DNA-60 will need a minimum of 3.030 inches inside the hub for the X-Lock to fit. Some rear hubs have the clearance and some do not.

Regards,
Glenn Thompson
VP Technical Support
Stage 8 Locking Fasteners
415 485-5340
Chris
Post Reply