Hey guys here in a few weeks im buying a 302 from one of my parts guys and he's selling me the 302 complete (everything) with radiator, hoses, lines, motor perches as well as engine mounts. The 302 is now backed with a 3speed and my 360 is backed by the 3speed as well. From my understanding i need the 302 fly wheel, clutch, pressure plate and bell housing. Now im wondering do the 302 perches bolt to the same holes the 360 perches did of do new holes have to be drilled?
Correct me on anything i didnt inform yall on and any tips, advice and correction is appreciated
360fe to 302
Moderators: Ranchero50, DuckRyder
- basketcase0302
- 100% FORDified!
- Posts: 6805
- Joined: Thu Jan 26, 2006 7:11 am
- Location: Hawthorne, Florida
Re: 360fe to 302
Here's the tutorial on the engine perches:
http://www.fordification.com/tech/engine-perches.htm
I did the same swap, (but C-6 instead of a standard transmission and didn't have to drill anything. The bolt holes should be there. Here's my build thread where you'll find pictures of the proper perch orientation also:
http://www.fordification.com/forum/view ... 22&t=46251
http://www.fordification.com/tech/engine-perches.htm
I did the same swap, (but C-6 instead of a standard transmission and didn't have to drill anything. The bolt holes should be there. Here's my build thread where you'll find pictures of the proper perch orientation also:
http://www.fordification.com/forum/view ... 22&t=46251
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
-
- New Member
- Posts: 189
- Joined: Sun Mar 13, 2011 7:26 pm
Re: 360fe to 302
Thanks Basket Case. Where abouts in Tennessee do you live? Is it Chattanooga, judging from the choo choo?
- basketcase0302
- 100% FORDified!
- Posts: 6805
- Joined: Thu Jan 26, 2006 7:11 am
- Location: Hawthorne, Florida
Re: 360fe to 302
Yep, finally made my way home here to Chattanooga, (after a very long 26 year Florida vacation) LOL!
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
-
- New Member
- Posts: 189
- Joined: Sun Mar 13, 2011 7:26 pm
Re: 360fe to 302
Im about 20 min from Chattanooga. I live in cleveland and have to drive to Chattanooga every day for school at Chat. State
- basketcase0302
- 100% FORDified!
- Posts: 6805
- Joined: Thu Jan 26, 2006 7:11 am
- Location: Hawthorne, Florida
Re: 360fe to 302
And I'm in Cleveland quite a bit for work!
Maybe we can meet up someday soon.
Maybe we can meet up someday soon.
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
-
- New Member
- Posts: 189
- Joined: Sun Mar 13, 2011 7:26 pm
Re: 360fe to 302
you know of a 302 3 speed bell housing?? I really need to find one......