72 F-350 chassis cab headers 2wd daully 460ci
Moderators: Ranchero50, DuckRyder
-
- New Member
- Posts: 19
- Joined: Sun Aug 21, 2011 9:57 pm
- Contact:
72 F-350 chassis cab headers 2wd daully 460ci
I would like to know if any of you have or know if I can get a set of headers to this application. It came original with 360 but I got it with a 460 that someone swapped out the 360 for the 460. The motor is a 73 Lincoln motor with what I guess is the 73 Lincoln exhaust manifolds, I looked on jegs,summit and am not sure since they did not put a 460 in this truck at this time. [Thanks to this site]. I would really appreciate some idea's or should I just keep the stock duals and manifolds. Thanks, John
Last edited by OneMoFord on Mon Aug 22, 2011 2:12 pm, edited 1 time in total.
- FORDification
- Site & Forum Admin
- Posts: 8047
- Joined: Sun Jul 11, 2004 12:52 am
- Location: Kansas, Wellsville
- Contact:
Re: 72 F-350 chassis cab headers 2wd daully 460ci
Just find headers for the '73-'79 trucks with a 460. They were factory installed in 2WDs and the chassis is essentially the same (mainly only sheetmetal changes), so they'll fit fine.
____| \__
-O-----O- Keith
'67 F-100 2WD SWB ~ '69 F-100 4WD SWB w/7" chop ~ 1975 F-250 Ranger XLT Supercab Camper Special
My '67 restoration video
-> Posting and you! <-a MUST watch for all!!
-O-----O- Keith
'67 F-100 2WD SWB ~ '69 F-100 4WD SWB w/7" chop ~ 1975 F-250 Ranger XLT Supercab Camper Special
My '67 restoration video
-> Posting and you! <-a MUST watch for all!!
-
- 100% FORDified!
- Posts: 22329
- Joined: Sun Aug 28, 2005 8:17 pm
- Location: Kansas, Ottawa
- Contact:
Re: 72 F-350 chassis cab headers 2wd daully 460ci
look for headers for a 73-79 truck with a 460 in it. and or the lincoln motor. if the 460 ford and lincoln heads ports and botls are the same then get them for the 73-79 trucks. they should fit the same as our trucks.