Carb help needed

Engine, ignition, fuel, cooling, exhaust

Moderators: DuckRyder, FORDification

Carb help needed

Postby SangerDude on Fri Nov 20, 2009 3:47 pm

I have a 68 F250 with 360.... I think the PO rebuilt the carb the carb some time ago, but the I.D. tag is missing....I am pretty sure the carb is a 2100 series manual choke motorcraft/autolite....my question is can anyone suggest site to purchase the carb kit or does anyone have a part # for a carb kit from say, NAPA....I found one on their site, but it says for a 2150...stamped on the side of carb was 1.08....not sure if that helps in the identification of this....

Thanks in advance!
User avatar
SangerDude
New Member
New Member
 
Posts: 68
Joined: Sat Jun 14, 2008 12:27 pm
Location: California, Ceres

Re: Carb help needed

Postby 70_F100 on Fri Nov 20, 2009 4:05 pm

Try this one from Autozone:

http://www.autozone.com/autozone/catalo ... id=1145232

Not sure if the link will work, but it's a GP Sorensen kit, and they have a pretty good reputation.
Wise men talk because they have something to say; fools talk because they have to say something.--Plato

That's not an oil leak :nono: That's SWEAT from all that HORSEPOWER!! :thup:
User avatar
70_F100
100% FORDified!
100% FORDified!
 
Posts: 1964
Joined: Mon Oct 22, 2007 12:23 pm
Location: North Carolina, Kernersville

Re: Carb help needed

Postby sideoilerfe on Fri Nov 20, 2009 11:17 pm

Is this the same carburetor?
You do not have the required permissions to view the files attached to this post.
Side oiler FE, see if you can catch me!!!

1970 F250 4x4 390/4spd
1968 F250 4X2 360/C6/No Rust!
User avatar
sideoilerfe
Blue Oval Guru
Blue Oval Guru
 
Posts: 1098
Joined: Tue Sep 11, 2007 11:04 pm
Location: Oregon, Portland


[ Previous topic | Next topic ]

Return to Engine

Who is online

Users browsing this forum: EvilCJ and 1 guest

Be sure to visit our sister site!