Ignition Switch
Moderators: Ranchero50, DuckRyder
-
- New Member
- Posts: 33
- Joined: Mon Nov 09, 2015 5:46 am
- Location: Groves, TX
Ignition Switch
Went to change my ignition switch on my 69 with what seems to be a 78 wiring harness. Well the plug behind the key switch was kind of melted and the yellow wire was barely held in there. What does the yellow wire run to and should I be worried about the clip being melted? I ordered a new color coded harness to replace that plug behind the ignition switch too
- bluef250
- Blue Oval Fanatic
- Posts: 924
- Joined: Fri Oct 29, 2004 8:49 pm
- Location: Arizona
Re: Ignition Switch
http://www.fordification.com/tech/wirin ... rging2.jpg
The yellow wire comes from the battery. What clip?
The harness is and plug should be replaced. The harness pig tails are crimp connectors. It helps to have a good crimping tool.
The yellow wire comes from the battery. What clip?
The harness is and plug should be replaced. The harness pig tails are crimp connectors. It helps to have a good crimping tool.
-
- New Member
- Posts: 33
- Joined: Mon Nov 09, 2015 5:46 am
- Location: Groves, TX
Re: Ignition Switch
Thanks bro, hopefully this will solve a lot oft problems.