New Engine for The "Speed Bump"!
Moderator: FORDification
-
Heirloom
- Blue Oval Fan
- Posts: 549
- Joined: Fri Feb 08, 2013 2:33 pm
- Location: Paradise
Re: New Engine for The "Speed Bump"!
Very nice work!
~Heirloom
'68 F250 360, 4 spd Project Thread!
Plans are for a stout 400, C6, 3.54 gears, 33" BFG AT's, bucket seats and custom console. Final assembly, nearing start up...
"Those who hammer their guns into plows will plow for those who do not."
~ Thomas Jefferson
"America will never be destroyed from the outside. If we falter and lose our freedoms, it will be because we destroyed ourselves."
~ Abraham Lincoln
'68 F250 360, 4 spd Project Thread!
Plans are for a stout 400, C6, 3.54 gears, 33" BFG AT's, bucket seats and custom console. Final assembly, nearing start up...
"Those who hammer their guns into plows will plow for those who do not."
~ Thomas Jefferson
"America will never be destroyed from the outside. If we falter and lose our freedoms, it will be because we destroyed ourselves."
~ Abraham Lincoln
-
cole71
- Preferred User
- Posts: 442
- Joined: Tue Aug 02, 2011 11:27 pm
- Location: Tallapoosa, Georgia
Re: New Engine for The "Speed Bump"!
Looking great! On your priming of the oil pump do you turn your drill (left) or counter clock-wise correct?
My build thread...http://www.fordification.com/forum/view ... 22&t=67317
-
SVT522
- Preferred User
- Posts: 267
- Joined: Sat Oct 30, 2004 4:25 pm
- Location: Delaware, Magnolia
Re: New Engine for The "Speed Bump"!
Counter clockwise. I use a socket that fits the oil pump shaft.
SVT522
ASE Master Automotive & Medium/Heavy Truck Technician
"The Speed Bump" 1967 F100 - 466 "Cobrajet", C-6 trans, 4.11 Detroit Locker
1969 F100 4x4 - 360, NP435, Dana 21
1973 Mach1 - 351 CJ, C-6, 9-Inch
1996 SVT Cobra #522
1987 F-250 4X4
ASE Master Automotive & Medium/Heavy Truck Technician
"The Speed Bump" 1967 F100 - 466 "Cobrajet", C-6 trans, 4.11 Detroit Locker
1969 F100 4x4 - 360, NP435, Dana 21
1973 Mach1 - 351 CJ, C-6, 9-Inch
1996 SVT Cobra #522
1987 F-250 4X4
-
Heirloom
- Blue Oval Fan
- Posts: 549
- Joined: Fri Feb 08, 2013 2:33 pm
- Location: Paradise
Re: New Engine for The "Speed Bump"!
It cracks me up when I see the 'tool' on the parts shelves for $30+.SVT522 wrote:Counter clockwise. I use a socket that fits the oil pump shaft.
~Heirloom
'68 F250 360, 4 spd Project Thread!
Plans are for a stout 400, C6, 3.54 gears, 33" BFG AT's, bucket seats and custom console. Final assembly, nearing start up...
"Those who hammer their guns into plows will plow for those who do not."
~ Thomas Jefferson
"America will never be destroyed from the outside. If we falter and lose our freedoms, it will be because we destroyed ourselves."
~ Abraham Lincoln
'68 F250 360, 4 spd Project Thread!
Plans are for a stout 400, C6, 3.54 gears, 33" BFG AT's, bucket seats and custom console. Final assembly, nearing start up...
"Those who hammer their guns into plows will plow for those who do not."
~ Thomas Jefferson
"America will never be destroyed from the outside. If we falter and lose our freedoms, it will be because we destroyed ourselves."
~ Abraham Lincoln
-
SVT522
- Preferred User
- Posts: 267
- Joined: Sat Oct 30, 2004 4:25 pm
- Location: Delaware, Magnolia
Re: New Engine for The "Speed Bump"!
I got the hood hinges painted and ready to install this weekend. I also got the back glass installed. I bought my seals from NPD and it was a PITA getting the back glass installed! Parachute 550 cord in the groove worked, however it was still a battle!
You do not have the required permissions to view the files attached to this post.
SVT522
ASE Master Automotive & Medium/Heavy Truck Technician
"The Speed Bump" 1967 F100 - 466 "Cobrajet", C-6 trans, 4.11 Detroit Locker
1969 F100 4x4 - 360, NP435, Dana 21
1973 Mach1 - 351 CJ, C-6, 9-Inch
1996 SVT Cobra #522
1987 F-250 4X4
ASE Master Automotive & Medium/Heavy Truck Technician
"The Speed Bump" 1967 F100 - 466 "Cobrajet", C-6 trans, 4.11 Detroit Locker
1969 F100 4x4 - 360, NP435, Dana 21
1973 Mach1 - 351 CJ, C-6, 9-Inch
1996 SVT Cobra #522
1987 F-250 4X4
-
SVT522
- Preferred User
- Posts: 267
- Joined: Sat Oct 30, 2004 4:25 pm
- Location: Delaware, Magnolia
Re: New Engine for The "Speed Bump"!
I've been busy lately and I'm close to driving my '67. The brakes have been rebuilt on all four corners, suspension components torqued at ride height, spray-in bed liner on the cab floor, seats installed and I just finished installing the windshield and hood this evening. I need to install the bumpers, tailgate and the B&M shifter and it will be ready for a test drive. 
You do not have the required permissions to view the files attached to this post.
SVT522
ASE Master Automotive & Medium/Heavy Truck Technician
"The Speed Bump" 1967 F100 - 466 "Cobrajet", C-6 trans, 4.11 Detroit Locker
1969 F100 4x4 - 360, NP435, Dana 21
1973 Mach1 - 351 CJ, C-6, 9-Inch
1996 SVT Cobra #522
1987 F-250 4X4
ASE Master Automotive & Medium/Heavy Truck Technician
"The Speed Bump" 1967 F100 - 466 "Cobrajet", C-6 trans, 4.11 Detroit Locker
1969 F100 4x4 - 360, NP435, Dana 21
1973 Mach1 - 351 CJ, C-6, 9-Inch
1996 SVT Cobra #522
1987 F-250 4X4
-
Heirloom
- Blue Oval Fan
- Posts: 549
- Joined: Fri Feb 08, 2013 2:33 pm
- Location: Paradise
Re: New Engine for The "Speed Bump"!
Very nice!~Heirloom
'68 F250 360, 4 spd Project Thread!
Plans are for a stout 400, C6, 3.54 gears, 33" BFG AT's, bucket seats and custom console. Final assembly, nearing start up...
"Those who hammer their guns into plows will plow for those who do not."
~ Thomas Jefferson
"America will never be destroyed from the outside. If we falter and lose our freedoms, it will be because we destroyed ourselves."
~ Abraham Lincoln
'68 F250 360, 4 spd Project Thread!
Plans are for a stout 400, C6, 3.54 gears, 33" BFG AT's, bucket seats and custom console. Final assembly, nearing start up...
"Those who hammer their guns into plows will plow for those who do not."
~ Thomas Jefferson
"America will never be destroyed from the outside. If we falter and lose our freedoms, it will be because we destroyed ourselves."
~ Abraham Lincoln
-
F100builder
- Blue Oval Guru
- Posts: 1304
- Joined: Thu Jan 10, 2008 6:55 pm
- Location: Idaho, Nampa
Re: New Engine for The "Speed Bump"!
I missed this build thread years ago! Glad I found it...great work!!! What kind of paint did you use?
Patrick
'56 F100; Must.II IFS, 351W bored & stroked to 395c.i. 470hp/483ft-lbs., AOD, 4-link coilover 9" w/ 3.89's
'69 F100; 390, C6, Dana 60 w/ 4.10's
'70 F100; 'new' and latest project soon to have a built 390/C6 and 3.50 gears
To see more of my F100's: http://www.cardomain.com/id/lowfat56
'56 F100; Must.II IFS, 351W bored & stroked to 395c.i. 470hp/483ft-lbs., AOD, 4-link coilover 9" w/ 3.89's
'69 F100; 390, C6, Dana 60 w/ 4.10's
'70 F100; 'new' and latest project soon to have a built 390/C6 and 3.50 gears
To see more of my F100's: http://www.cardomain.com/id/lowfat56
-
SVT522
- Preferred User
- Posts: 267
- Joined: Sat Oct 30, 2004 4:25 pm
- Location: Delaware, Magnolia
Re: New Engine for The "Speed Bump"!
It's Bright White from Summit Racing. It's made by Kirker and Autoboby Tool Mart has even better prices than Summit.
SVT522
ASE Master Automotive & Medium/Heavy Truck Technician
"The Speed Bump" 1967 F100 - 466 "Cobrajet", C-6 trans, 4.11 Detroit Locker
1969 F100 4x4 - 360, NP435, Dana 21
1973 Mach1 - 351 CJ, C-6, 9-Inch
1996 SVT Cobra #522
1987 F-250 4X4
ASE Master Automotive & Medium/Heavy Truck Technician
"The Speed Bump" 1967 F100 - 466 "Cobrajet", C-6 trans, 4.11 Detroit Locker
1969 F100 4x4 - 360, NP435, Dana 21
1973 Mach1 - 351 CJ, C-6, 9-Inch
1996 SVT Cobra #522
1987 F-250 4X4
-
F100builder
- Blue Oval Guru
- Posts: 1304
- Joined: Thu Jan 10, 2008 6:55 pm
- Location: Idaho, Nampa
Re: New Engine for The "Speed Bump"!
Is it urethane? Single stage too I'm assuming? That's what I'm planning to use.
Patrick
'56 F100; Must.II IFS, 351W bored & stroked to 395c.i. 470hp/483ft-lbs., AOD, 4-link coilover 9" w/ 3.89's
'69 F100; 390, C6, Dana 60 w/ 4.10's
'70 F100; 'new' and latest project soon to have a built 390/C6 and 3.50 gears
To see more of my F100's: http://www.cardomain.com/id/lowfat56
'56 F100; Must.II IFS, 351W bored & stroked to 395c.i. 470hp/483ft-lbs., AOD, 4-link coilover 9" w/ 3.89's
'69 F100; 390, C6, Dana 60 w/ 4.10's
'70 F100; 'new' and latest project soon to have a built 390/C6 and 3.50 gears
To see more of my F100's: http://www.cardomain.com/id/lowfat56
-
SVT522
- Preferred User
- Posts: 267
- Joined: Sat Oct 30, 2004 4:25 pm
- Location: Delaware, Magnolia
Re: New Engine for The "Speed Bump"!
Yep. Single stage urethane and it buffed out pretty nice.
SVT522
ASE Master Automotive & Medium/Heavy Truck Technician
"The Speed Bump" 1967 F100 - 466 "Cobrajet", C-6 trans, 4.11 Detroit Locker
1969 F100 4x4 - 360, NP435, Dana 21
1973 Mach1 - 351 CJ, C-6, 9-Inch
1996 SVT Cobra #522
1987 F-250 4X4
ASE Master Automotive & Medium/Heavy Truck Technician
"The Speed Bump" 1967 F100 - 466 "Cobrajet", C-6 trans, 4.11 Detroit Locker
1969 F100 4x4 - 360, NP435, Dana 21
1973 Mach1 - 351 CJ, C-6, 9-Inch
1996 SVT Cobra #522
1987 F-250 4X4
-
48prerunner
- Preferred User
- Posts: 495
- Joined: Thu Sep 30, 2010 5:44 pm
Re: New Engine for The "Speed Bump"!
How bad was windshield install ? I'm not looking forward to that.
-
SVT522
- Preferred User
- Posts: 267
- Joined: Sat Oct 30, 2004 4:25 pm
- Location: Delaware, Magnolia
Re: New Engine for The "Speed Bump"!
My Bump is finally all together. Now all I need to do is get it titled, tagged and inspected.
You do not have the required permissions to view the files attached to this post.
SVT522
ASE Master Automotive & Medium/Heavy Truck Technician
"The Speed Bump" 1967 F100 - 466 "Cobrajet", C-6 trans, 4.11 Detroit Locker
1969 F100 4x4 - 360, NP435, Dana 21
1973 Mach1 - 351 CJ, C-6, 9-Inch
1996 SVT Cobra #522
1987 F-250 4X4
ASE Master Automotive & Medium/Heavy Truck Technician
"The Speed Bump" 1967 F100 - 466 "Cobrajet", C-6 trans, 4.11 Detroit Locker
1969 F100 4x4 - 360, NP435, Dana 21
1973 Mach1 - 351 CJ, C-6, 9-Inch
1996 SVT Cobra #522
1987 F-250 4X4
-
jrreed1634
- New Member
- Posts: 103
- Joined: Sat Jan 22, 2011 3:29 pm
- Location: Hudsonville, MI
Re: New Engine for The "Speed Bump"!
Congrats, good work.
-
F100builder
- Blue Oval Guru
- Posts: 1304
- Joined: Thu Jan 10, 2008 6:55 pm
- Location: Idaho, Nampa
Re: New Engine for The "Speed Bump"!
Nice work! The truck looks great!
Patrick
'56 F100; Must.II IFS, 351W bored & stroked to 395c.i. 470hp/483ft-lbs., AOD, 4-link coilover 9" w/ 3.89's
'69 F100; 390, C6, Dana 60 w/ 4.10's
'70 F100; 'new' and latest project soon to have a built 390/C6 and 3.50 gears
To see more of my F100's: http://www.cardomain.com/id/lowfat56
'56 F100; Must.II IFS, 351W bored & stroked to 395c.i. 470hp/483ft-lbs., AOD, 4-link coilover 9" w/ 3.89's
'69 F100; 390, C6, Dana 60 w/ 4.10's
'70 F100; 'new' and latest project soon to have a built 390/C6 and 3.50 gears
To see more of my F100's: http://www.cardomain.com/id/lowfat56