1969 Ford Crew Cab / Cummins Project

Post progress reports on your project truck(s)

Moderator: FORDification

Post Reply
User avatar
RedneckTexan
Blue Oval Guru
Blue Oval Guru
Posts: 1102
Joined: Tue Apr 03, 2007 6:58 pm
Location: The backwoods of TEJAS!

re: 1969 Ford Crew Cab / Cummins Project

Post by RedneckTexan »

Pics of the D80 please :D
John

68 F-100~68 F-350~69 F-250~69 F-100
76 F-150~78 bronco~78 bronco

http://oldfordcrewcabs.com/
User avatar
HRDROKN
Preferred User
Preferred User
Posts: 384
Joined: Mon Jul 09, 2007 3:39 pm
Location: California, Vacaville

re: 1969 Ford Crew Cab / Cummins Project

Post by HRDROKN »

Getting the motor in position to determine offset, x-member positioning and motor mount fabrication...

Image

Image

Image
Last edited by HRDROKN on Sat Oct 27, 2007 3:11 pm, edited 2 times in total.
'69 Ford Cummins Crew Cab... Built 6BT main & head studs, ported & oringed head, springs, Ti retainers, marine cam, tweaked P7100, 4K gov kit, NV4500 w/1.375" input, Southbend 3600# DD clutch, NP271 w/SYE, D60 HP front, high steer, 16" coilovers & 4-link, D80 w/disc rear, 4.10's & LSD, spinning 38" x 14.fiddy's on classic slots..... more coming!


http://www.fordification.com/forum/view ... hp?t=23267
User avatar
HRDROKN
Preferred User
Preferred User
Posts: 384
Joined: Mon Jul 09, 2007 3:39 pm
Location: California, Vacaville

re: 1969 Ford Crew Cab / Cummins Project

Post by HRDROKN »

More.......

Image

Image

8)
Last edited by HRDROKN on Sat Oct 27, 2007 3:12 pm, edited 1 time in total.
'69 Ford Cummins Crew Cab... Built 6BT main & head studs, ported & oringed head, springs, Ti retainers, marine cam, tweaked P7100, 4K gov kit, NV4500 w/1.375" input, Southbend 3600# DD clutch, NP271 w/SYE, D60 HP front, high steer, 16" coilovers & 4-link, D80 w/disc rear, 4.10's & LSD, spinning 38" x 14.fiddy's on classic slots..... more coming!


http://www.fordification.com/forum/view ... hp?t=23267
User avatar
HRDROKN
Preferred User
Preferred User
Posts: 384
Joined: Mon Jul 09, 2007 3:39 pm
Location: California, Vacaville

re: 1969 Ford Crew Cab / Cummins Project

Post by HRDROKN »

And some more pics.... Getting a plan together for motor mount fabrication.

Image

Image

Image

8)
Last edited by HRDROKN on Sat Oct 27, 2007 3:18 pm, edited 1 time in total.
'69 Ford Cummins Crew Cab... Built 6BT main & head studs, ported & oringed head, springs, Ti retainers, marine cam, tweaked P7100, 4K gov kit, NV4500 w/1.375" input, Southbend 3600# DD clutch, NP271 w/SYE, D60 HP front, high steer, 16" coilovers & 4-link, D80 w/disc rear, 4.10's & LSD, spinning 38" x 14.fiddy's on classic slots..... more coming!


http://www.fordification.com/forum/view ... hp?t=23267
User avatar
HRDROKN
Preferred User
Preferred User
Posts: 384
Joined: Mon Jul 09, 2007 3:39 pm
Location: California, Vacaville

re: 1969 Ford Crew Cab / Cummins Project

Post by HRDROKN »

Started the passenger side motor mount....

Image

Image

:thup:
Last edited by HRDROKN on Sat Oct 27, 2007 3:20 pm, edited 1 time in total.
'69 Ford Cummins Crew Cab... Built 6BT main & head studs, ported & oringed head, springs, Ti retainers, marine cam, tweaked P7100, 4K gov kit, NV4500 w/1.375" input, Southbend 3600# DD clutch, NP271 w/SYE, D60 HP front, high steer, 16" coilovers & 4-link, D80 w/disc rear, 4.10's & LSD, spinning 38" x 14.fiddy's on classic slots..... more coming!


http://www.fordification.com/forum/view ... hp?t=23267
User avatar
HRDROKN
Preferred User
Preferred User
Posts: 384
Joined: Mon Jul 09, 2007 3:39 pm
Location: California, Vacaville

Re: re: 1969 Ford Crew Cab / Cummins Project

Post by HRDROKN »

RedneckTexan wrote:Pics of the D80 please :D
OK... I'll take some pics this week :wink:

The D80 makes a D60 look like a toothpick!!!

8)
'69 Ford Cummins Crew Cab... Built 6BT main & head studs, ported & oringed head, springs, Ti retainers, marine cam, tweaked P7100, 4K gov kit, NV4500 w/1.375" input, Southbend 3600# DD clutch, NP271 w/SYE, D60 HP front, high steer, 16" coilovers & 4-link, D80 w/disc rear, 4.10's & LSD, spinning 38" x 14.fiddy's on classic slots..... more coming!


http://www.fordification.com/forum/view ... hp?t=23267
User avatar
Thunderfoot
100% FORDified!
100% FORDified!
Posts: 2207
Joined: Tue Apr 17, 2007 2:34 pm
Location: Idaho, Boise

re: 1969 Ford Crew Cab / Cummins Project

Post by Thunderfoot »

:clap: Looking GOOD can't wait to see more :D thing is going to be 8)
Shayne
I'm not "Brand Loyal" Ford-Chevy-Dodge-Toyota I have them all, one even cross mixed...
If it Looks good and Works good then it's ok by me. Everything has its issues from time to time...

69 SWB (project) & 69 Highboy (driver/project)
http://s197.photobucket.com/albums/aa29 ... d%20truck/
http://www.fordification.com/galleries/ ... ?cat=10399
User avatar
RedneckTexan
Blue Oval Guru
Blue Oval Guru
Posts: 1102
Joined: Tue Apr 03, 2007 6:58 pm
Location: The backwoods of TEJAS!

Re: re: 1969 Ford Crew Cab / Cummins Project

Post by RedneckTexan »

HRDROKN wrote:
RedneckTexan wrote:Pics of the D80 please :D
OK... I'll take some pics this week :wink:

The D80 makes a D60 look like a toothpick!!!

8)
Can't wait to see it :D
John

68 F-100~68 F-350~69 F-250~69 F-100
76 F-150~78 bronco~78 bronco

http://oldfordcrewcabs.com/
User avatar
HRDROKN
Preferred User
Preferred User
Posts: 384
Joined: Mon Jul 09, 2007 3:39 pm
Location: California, Vacaville

re: 1969 Ford Crew Cab / Cummins Project

Post by HRDROKN »

OK.... for all you big butt :D I mean rearend fans..... :wink:

The D80 makes that stock D60 look like a stick!


Image

:D
Last edited by HRDROKN on Sat Oct 27, 2007 3:23 pm, edited 1 time in total.
'69 Ford Cummins Crew Cab... Built 6BT main & head studs, ported & oringed head, springs, Ti retainers, marine cam, tweaked P7100, 4K gov kit, NV4500 w/1.375" input, Southbend 3600# DD clutch, NP271 w/SYE, D60 HP front, high steer, 16" coilovers & 4-link, D80 w/disc rear, 4.10's & LSD, spinning 38" x 14.fiddy's on classic slots..... more coming!


http://www.fordification.com/forum/view ... hp?t=23267
User avatar
HRDROKN
Preferred User
Preferred User
Posts: 384
Joined: Mon Jul 09, 2007 3:39 pm
Location: California, Vacaville

re: 1969 Ford Crew Cab / Cummins Project

Post by HRDROKN »

Finishing up the passenger side motor mount.

Image

Image

Image

8)
Last edited by HRDROKN on Sat Oct 27, 2007 3:25 pm, edited 1 time in total.
'69 Ford Cummins Crew Cab... Built 6BT main & head studs, ported & oringed head, springs, Ti retainers, marine cam, tweaked P7100, 4K gov kit, NV4500 w/1.375" input, Southbend 3600# DD clutch, NP271 w/SYE, D60 HP front, high steer, 16" coilovers & 4-link, D80 w/disc rear, 4.10's & LSD, spinning 38" x 14.fiddy's on classic slots..... more coming!


http://www.fordification.com/forum/view ... hp?t=23267
User avatar
HRDROKN
Preferred User
Preferred User
Posts: 384
Joined: Mon Jul 09, 2007 3:39 pm
Location: California, Vacaville

re: 1969 Ford Crew Cab / Cummins Project

Post by HRDROKN »

Driver side motor mount.....

Image

Image

Image

8)
Last edited by HRDROKN on Sat Oct 27, 2007 3:27 pm, edited 1 time in total.
'69 Ford Cummins Crew Cab... Built 6BT main & head studs, ported & oringed head, springs, Ti retainers, marine cam, tweaked P7100, 4K gov kit, NV4500 w/1.375" input, Southbend 3600# DD clutch, NP271 w/SYE, D60 HP front, high steer, 16" coilovers & 4-link, D80 w/disc rear, 4.10's & LSD, spinning 38" x 14.fiddy's on classic slots..... more coming!


http://www.fordification.com/forum/view ... hp?t=23267
User avatar
HRDROKN
Preferred User
Preferred User
Posts: 384
Joined: Mon Jul 09, 2007 3:39 pm
Location: California, Vacaville

re: 1969 Ford Crew Cab / Cummins Project

Post by HRDROKN »

Driver side mount complete....

Image

8)
Last edited by HRDROKN on Sat Oct 27, 2007 3:29 pm, edited 1 time in total.
'69 Ford Cummins Crew Cab... Built 6BT main & head studs, ported & oringed head, springs, Ti retainers, marine cam, tweaked P7100, 4K gov kit, NV4500 w/1.375" input, Southbend 3600# DD clutch, NP271 w/SYE, D60 HP front, high steer, 16" coilovers & 4-link, D80 w/disc rear, 4.10's & LSD, spinning 38" x 14.fiddy's on classic slots..... more coming!


http://www.fordification.com/forum/view ... hp?t=23267
User avatar
basketcase0302
100% FORDified!
100% FORDified!
Posts: 6805
Joined: Thu Jan 26, 2006 7:11 am
Location: Hawthorne, Florida

re: 1969 Ford Crew Cab / Cummins Project

Post by basketcase0302 »

HRDROKN,

Good job! :thup:
She's gonna be one pulling beast that's for sure!

Basketcase
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
69CSF250
New Member
New Member
Posts: 84
Joined: Wed Aug 09, 2006 11:40 am
Location: Virginia

re: 1969 Ford Crew Cab / Cummins Project

Post by 69CSF250 »

Thats is a sweet truck cant wait for the next update... keep up the good work...
User avatar
HRDROKN
Preferred User
Preferred User
Posts: 384
Joined: Mon Jul 09, 2007 3:39 pm
Location: California, Vacaville

re: 1969 Ford Crew Cab / Cummins Project

Post by HRDROKN »

Ok... motor mounts are complete. The motor offset is 2" which leaves room for the a/c compressor and plenty of clearance for the drivers side drop NP205 transfer case.

Image

Image

:wink:
'69 Ford Cummins Crew Cab... Built 6BT main & head studs, ported & oringed head, springs, Ti retainers, marine cam, tweaked P7100, 4K gov kit, NV4500 w/1.375" input, Southbend 3600# DD clutch, NP271 w/SYE, D60 HP front, high steer, 16" coilovers & 4-link, D80 w/disc rear, 4.10's & LSD, spinning 38" x 14.fiddy's on classic slots..... more coming!


http://www.fordification.com/forum/view ... hp?t=23267
Post Reply