4x4 Rear Drive Shaft

Moderator: FORDification

User avatar
hdman90
New Member
New Member
Posts: 152
Joined: Thu Mar 19, 2015 8:34 am
Location: Erie, Pa
Contact:

4x4 Rear Drive Shaft

Postby hdman90 » Mon Nov 13, 2017 10:28 am

Looking for a rear drive shaft for a 67-72 F-250 with 4wd and a Dana 24 transfer case. This would be part number C7TZ-4602-BG. The length from end of hole (drive shaft side) to end of spline is 34-13/32".
Thank you.
1969 F-100 LWB 2wd 240 3spd manual

User avatar
basketcase0302
100% FORDified!
100% FORDified!
Posts: 5876
Joined: Thu Jan 26, 2006 7:11 am
Location: Tennessee, Chattanooga (Choo-Choo town)

Re: 4x4 Rear Drive Shaft

Postby basketcase0302 » Tue Nov 14, 2017 8:11 pm

"hdman90"]Looking for a rear drive shaft for a 67-72 F-250 with 4wd and a Dana 24 transfer case. This would be part number C7TZ-4602-BG. The length from end of hole (drive shaft side) to end of spline is 34-13/32".
Thank you.


Probably highly unlikely to find the OEM part number your looking for. I've been working of our Ford trucks since the early 70's and maybe seen zero to one driveshaft that ever had a Ford OEM part number stamped on it. :(
Typically how you'd approach this is to have it custom built which will also be a lot easier on your wallet as they too will balance it, (once you know the end cap / U-joint sizes) from a local driveline shop. I'm sorry I don't know the area better but maybe google driveline / drive shaft / (don't rule out finding the driveline shop from a transmission shop who uses them a lot either). :2cents:

Try this link to help ID it:
http://www.daytonclutch.com/driveline/how-to
Jeff
viewtopic.php?f=22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4

I'm "on the fence" about another bump right now / still looking at them / but not real sure if I'm ready for it or not (until I get moved). :(


Return to “Parts Wanted”

Who is online

Users browsing this forum: No registered users