Power Steering Pump Bracket/Hardware/w factory air (300 I6)

Moderator: FORDification

Post Reply
User avatar
klk67ranger
New Member
New Member
Posts: 67
Joined: Sun Feb 14, 2010 12:06 pm
Location: Laramie, WY

Power Steering Pump Bracket/Hardware/w factory air (300 I6)

Post by klk67ranger »

My dad is looking for a power steering bracket setup for a 71' with a 300 I6. It has factory air, not sure if that makes a difference. I guess he may need pulleys too. He has the pump and box already. Let me know what you have and how much you would like for it.

Thanks,
Korey
Ripsnorter
New Member
New Member
Posts: 96
Joined: Fri Aug 03, 2007 6:45 pm
Location: Washington

Re: Power Steering Pump Bracket/Hardware/w factory air (300 I6)

Post by Ripsnorter »

I have the bracket, with idler and the power steering pump as well in it.

Problem is that it's off of a later (80s?) 300 I6. The motor had EFI on it and has the power steering pump that has the plastic backed reservoir on it. It's also a bit bulky and might not fit in one of those flat rate USPS boxes. I could take the pulleys off the engine too. I'm not certain his A/C pump would fit either.

It sounds like he's wanting something older. Sorry, thought I had one!
Post Reply